Amana #8 Countersink 7/16 x 3 For Wood Screws

Amana #8 Countersink 7/16 x 3 starts as a dedicated countersink for wood screws, so every hole is shaped for screw heads instead of general-purpose drilling. The tool is classified under countersinks, which focuses its geometry on creating a clean conical seat for screw heads in woodworking jobs. The Web Description identifies this model as for wood screws, so the cutting profile matches common woodworking screw heads for predictable seating in cabinets, fixtures, and trim. The SAP Description states COUNTERSINK, #8/#9 SCREW, which defines its target screw range as #8 and #9, giving installers a specific match instead of guessing fit by eye. The Brand is Amana Tool, so this bit aligns with Amana machining standards that many shops already use in their drilling setups.

Key Countersink Details For Wood Fastening

• The SAP Description lists COUNTERSINK, #8/#9 SCREW, which means the profile is tuned for #8 and #9 wood screws, so screw heads sit consistently and flush in typical cabinet and furniture stock.
• The Web Description notes design for wood screws, so the cutting geometry is intended for wood fibers, which helps the hole match common woodworking screw heads instead of metal-specific shapes.
• The Product Class is Countersinks, placing this tool in the countersinking step of drilling workflows, so crews can assign it to the task of forming the screw head seat after or during pilot drilling.
• The Web Description states 2 wing, indicating a two-wing cutting body that shapes the countersink, which gives a predictable chamfer profile around the screw head for repeatable visual alignment.

Drilling And Countersinking Setup Details

The Product Name specifies 7/16 x 3, so the countersink body diameter and 3 inch length are defined for planning drill reach and clearance in jigs. The Web Description adds 3 inch long slow-spiral drill bit, so the integrated drill length is known when working through typical cabinet components. The mention of slow-spiral drill bit describes the flute style, which manages chip flow differently than a fast spiral when boring into wood. The Category listing under Bits, Blades and Cutters situates this tool with other cutting bits in a shop, so crews can assign it logically alongside other dedicated drilling tools.

Using This Amana Countersink In Woodworking

Where The #8 #9 Countersink Fits Best

The SAP Description defines this tool as COUNTERSINK, #8/#9 SCREW, so it fits jobs that standardize on #8 or #9 wood screws in cabinetry, casework, or shop fixtures. The Web Description states for wood screws, so its cutting profile aligns with common wood screw heads instead of general metal fasteners, which helps the final seat match typical woodworking hardware. The Product Name lists Amana #8 Countersink 7/16 x 3, tying the size and screw range together for layouts that need the 7/16 inch countersink diameter around the screw head. The Category Bits, Blades and Cutters|Countersinks and Counter Bores positions it as a countersinking tool in drilling stations, so it is suited to work cells that combine pilot drilling and countersinking on wood components.

Details That Support Consistent Screw Seating

The Web Description notes 2 wing, meaning the countersink cutting section uses two wings to form the recess, which shapes a uniform seat around the screw head for consistent depth from piece to piece. The same description specifies 3 inch long slow-spiral drill bit, so the drilling portion extends 3 inches with a slow spiral that guides chips differently, which supports controlled boring in wood as the countersink forms the head recess. The Product Name repeating 7/16 x 3 ties the countersink size and overall length into layout planning, so fixture builders can size stops and depth settings around the known dimensions. The Manufacturer Part # 55208 gives a precise identifier when matching existing Amana setups, which helps repeat the same countersink geometry across multiple machines or locations.

Common Questions About The Amana 55208 Countersink

Select The Amana Countersink For Wood Screw Work

The Amana #8 Countersink 7/16 x 3 combines a countersink classified for #8/#9 screw use with a 3 inch long slow-spiral drill bit, so one setup handles both drilling and screw head seating in wood. The 2 wing description defines a shaped countersink profile around wood screw heads, which supports a clean, repeatable appearance on visible cabinet or furniture faces. With Manufacturer Part # 55208 and Brand Amana Tool, ordering this specific countersink from Wurth Baer Supply aligns the drilling operation with an identified Amana pattern used across many woodworking shops.