
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
5/8 inch glide strip from Bainbridge Manufacturing provides low cost, high production plastic glide buttons for work surfaces and tables, so you can protect surfaces while keeping installation time and material expense under control on repetitive jobs. Each glide button has a 5/8 inch outside diameter, which spreads contact over a wider area, helping support furniture feet or table bases without concentrating load on a sharp edge. The buttons are 3/16 inch thick, giving a defined stand-off height that separates work surfaces from the floor or other contact surfaces. An interior diameter of 3/8 inch is designed to apply a staple, creating a direct mechanical hold into the substrate. The tan color helps these furniture glides blend with many common wood tones and components in professional woodworking projects.
These Bainbridge furniture glides use an interior diameter of 3/8 inch to apply staple, so the staple seats inside the glide body and clamps the button directly to the substrate. Glide buttons on a strip of 4 allow easy stapling of one button, then a quick twist frees remaining buttons, which keeps handling simple at the bench or on an assembly line. With each button 3/16 inch thick, installers gain a defined offset from the floor that can be repeated from leg to leg, helping align work surfaces and table bases at a consistent height.
The SAP description "GLIDE STRIP BUTTON, TAN" and the product class Furniture Glides identify this as a dedicated solution for supporting work surfaces and tables. The 5/8 inch outside diameter suits many furniture feet or base members where a compact glide is needed rather than a large pad, helping it integrate into smaller leg profiles. As part of the Work Surface & Tables category, these tan glide buttons align with shop-built tops, commercial tables, and similar projects where a defined stand-off of 3/16 inch is beneficial. The low cost, high production design matches environments where many identical stations, desks, or utility tables are assembled, so a consistent part can be used across the run.
The manufacturer part number 295T-62 ties this glide strip to Bainbridge Manufacturing, giving installers a stable reference when reordering for repeat jobs. Glide buttons on a strip of 4 allow easy stapling of one button, then a quick twist frees remaining buttons, so the installer follows the same motion at each leg and maintains output. The interior diameter of 3/8 inch to apply staple guides where the staple lands, which helps keep the fastener centered and reduces misalignment between glide and leg end. Each button being 3/16 inch thick and 5/8 inch in outside diameter means every contact point shares the same height and footprint, which supports uniform stance on finished work surfaces and tables. The tan color also stays consistent across installations, presenting a unified look wherever these furniture glides are used in production runs.
The 5/8 inch glide strip is a low cost, high production plastic glide button system classified as Furniture Glides for use on work surfaces and tables.
The glide buttons on a strip of 4 allow easy stapling of one button, then a quick twist frees remaining buttons, which streamlines repetitive mounting.
Each glide button has a 5/8 inch outside diameter, is 3/16 inch thick, and has an interior diameter of 3/8 inch to apply staple for fastening.
These Bainbridge Manufacturing glide buttons are tan in color, which coordinates with many common wood and laminate tones on work surfaces.
The glide buttons have an interior diameter of 3/8 inch to apply staple, so the staple drives through the center zone of the plastic button into the substrate.
The 295T-62 designation is the Bainbridge Manufacturing part number for this tan glide strip button, supporting consistent selection for repeat projects.
The 5/8 inch glide strip from Bainbridge Manufacturing combines low cost, high production plastic glide buttons with a strip-of-4 layout, so installation on work surfaces and tables stays efficient. With 5/8 inch outside diameter, 3/16 inch thickness, and an interior diameter of 3/8 inch to apply staple, every button delivers a predictable footprint and stand-off. The tan Furniture Glides classification and 295T-62 part number help you align this glide choice with ongoing work surface and table programs that require repeatable results.
Sold In: 1000 Each