
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Lavi bright brass flush end post defines the termination point of a 2 inch outside diameter solid brass rail, so foot rails, handrails, or bar rails finish cleanly at a wall or floor connection. The solid brass rail with 1/2 inch wall thickness provides a substantial feel, which supports demanding bar or commercial traffic areas. The polished brass finish creates a bright metal surface, which visually matches other polished brass railing components on the same run. The finish is not lacquered, so the exposed brass surface can develop patina over time in active environments. The post is most commonly used for foot rail, handrail, buffet hardware, bar rail, room dividers, and guard rails, so one part number covers several railing layouts in the same project. The flush end design keeps the 2 inch rail alignment consistent, which simplifies layout from start to end on straight runs.
The flush end post is designed around a 2 inch outside diameter rail, so installers can cut and prep rail lengths knowing the end condition matches that diameter exactly. The 1/2 inch wall thickness supports bracket placement at the recommended 4 foot spacing between brackets, which simplifies marking runs in bars, buffets, or room dividers. Because the surface is polished brass and not lacquered, installers working on remodels can polish the exposed areas after mounting, which helps blend field cuts with factory-finished sections. The post functions within bar and foot railing, handrail, buffet hardware, room divider, and guard rail layouts, so the same spacing and cut rules can be repeated across these installations.
This Lavi Industries flush end post is most commonly used for foot rail, handrail, buffet hardware, bar rail, room dividers, and guard rails, so it fits both commercial and residential railing concepts built around 2 inch outside diameter rail. In a bar rail, the 2 inch diameter matches typical foot rail tubing, so the end post finishes the rail without a visible size change. In a handrail or guard rail, the same 2 inch outside diameter creates a consistent grip profile and visual line from start to end. For buffet hardware and room dividers, the polished brass finish delivers a uniform appearance when multiple short rail sections terminate into surfaces at different heights. Across these applications, the solid brass construction and defined outside diameter help maintain consistent geometry from component to component.
The 2 inch outside diameter specification allows installers to standardize cutting, drilling, and alignment jigs around a single tube size, which reduces layout time across foot rails, bar rails, and room dividers. The 1/2 inch wall thickness provides extra material at cut ends, which helps the rail seat securely into mating fittings and the flush end post without deforming under set loads in high-contact areas. The polished brass finish means visible joints, such as where the rail meets the end post, present a continuous bright metal surface when cleaned, which matters on bar fronts and buffets where guests see the hardware at close range. Because the brass is not lacquered, surface maintenance processes such as polishing can be repeated over the life of the installation, which helps keep different rail sections and end posts visually aligned, even when installed at different times.
This end post is designed around a 2 inch outside diameter solid brass rail, so it integrates directly into 2 inch bar, foot, or guard rail runs without changing tube size.
The end post uses a polished brass finish that is not lacquered, so the exposed brass can be maintained over time using suitable polishing products such as those referenced with Lido Lustre.
The flush end post is most commonly used for foot rail, handrail, buffet hardware, bar rail, room dividers, and guard rails, so it serves many railing layouts in one project.
The 1/2 inch wall thickness in the solid brass rail provides extra metal at the tube section, which supports loads and contact in bar fronts or guard rail lines.
A spacing of 4 feet between brackets is recommended for the rail that works with this end post, which gives a simple planning number when laying out support points.
The manufacturer part number 00-340/2 identifies this specific Lavi Industries bright brass flush end post for 2 inch outside diameter rail within bar and foot railing systems.
The Lavi bright brass flush end post, 00-340/2, pairs a 2 inch outside diameter solid brass rail with a polished, non-lacquered finish, so it fits bar, foot, handrail, buffet, room divider, and guard rail projects using consistent spacing. Use this end post when a defined 2 inch rail size, substantial 1/2 inch wall thickness, and bright brass appearance are desired across multiple run types that follow the recommended 4 foot bracket spacing.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BC120-144 Mfr# 00-A120/12 | Lavi Bright Brass Railing 2" D x 144" L, 00-A120/12 | ||||
Sold in: 1 Each | BC120-48 Mfr# 00-A120/4 | Lavi Bright Brass Railing 2" D x 48" L, 00-A120/4 | ||||
Sold in: 1 Each | BC120-72 Mfr# 00-A120/6 | Lavi Bright Brass Railing 2" D x 72" L, 00-A120/6 | ||||
Sold in: 1 Each | BC120-96 Mfr# 00-A120/8 | Lavi Bright Brass Railing 2" D x 96" L, 00-A120/8 | ||||
Sold in: 1 Each | BC201 Mfr# 00201 | Lavi Metal Adhesive D, 00201 |