Bosch wavy edge router bit gives you a profiling cutter built around a 1-1/4 inch diameter, so the cutting pattern sweeps a wider area in a single pass, which helps maintain a consistent decorative edge on larger workpieces or cabinet components. The bit sits on a 1/4 inch shank, allowing it to fit routers that take 1/4 inch bits, which keeps setup straightforward in many shop and jobsite routers. As a router bit in the Profiling class, it is intended to shape edges rather than simply cut grooves, so it plays a specific role in creating contour details. The carbide tipped construction focuses the cutting action on carbide edges, which supports edge retention through repeated passes on typical woodworking materials. A ball bearing pilot at the tip guides the profile against the work edge, so the cutting pattern follows the stock reliably without relying on fence settings for every cut.
The 1/4 inch shank on this wavy edge router bit is sized for collets designed around 1/4 inch bits, so it seats securely when properly tightened in a router capable of holding that shank size. With a 1-1/4 inch diameter cutter, the bit presents a broader cutting circle, which means the router benefits from a stable grip and deliberate feed to let the profile form cleanly along the work edge. Being a profiling router bit, it is used at the workpiece edge rather than buried in a slot, so the ball bearing pilot can ride directly along the stock to establish the pattern. The carbide tipped cutting edges engage the material while the bearing controls the path, which helps produce a repeatable wavy contour in standard woodworking setups.
This router bit is classified under Bits, Blades and Cutters in the Profiling category, so it fits into tooling sets used for shaping visible edges on woodworking components. As a router bit with a wavy edge design, it is suited to creating a shaped profile instead of a simple square or chamfered edge, giving projects a distinct contoured detail wherever the edge is exposed. The 1-1/4 inch diameter means the profile extends across a noticeable width of the edge, so it can be used on cabinet parts, trim pieces, or panels where a broader decorative band is desired rather than a narrow detail. With the 1/4 inch shank, the bit aligns with compact routers often used for edge work, positioning it well for shop or onsite edge shaping tasks that rely on profiling bits.
The Bosch 85606M designation ties this wavy edge router bit to a specific geometry, which supports consistent results when the same part number is used across multiple jobs or replacement cycles. Carbide tipped edges take on the actual cutting load, so the cutting corners retain their geometry longer under normal wood routing, helping the wavy pattern stay crisp over repeated passes on similar materials. The ball bearing pilot at the cutting end guides the bit against the workpiece edge, so once the work is aligned, the bearing tracks the contour while the knives cut, reducing dependence on fence alignment for every pass. Because the cutter diameter is 1-1/4 inches, the profile completes within that circle, so the operator can anticipate how much material will be shaped at the edge when laying out clearances near adjacent details. The 1/4 inch shank forms the interface with the router collet, so using this shank size organizes tooling around routers that accept 1/4 inch bits, which simplifies maintaining a consistent set of profiling tools in that class of machines.
The Bosch 85606M is a router bit in the Profiling product class, so it is designed to shape a wavy edge profile along the edges of woodworking pieces.
The wavy edge router bit has a 1-1/4 inch diameter, so it creates a relatively broad decorative profile across the edge with each pass.
The router bit uses a 1/4 inch shank, so it fits into router collets sized for 1/4 inch bits commonly found on compact and trim routers.
The ball bearing pilot rides against the workpiece edge, guiding the wavy profile so the bit follows the stock consistently without constant fence adjustments.
The carbide tipped design places wear-resistant carbide at the cutting edges, supporting sustained sharpness of the wavy profile under typical woodworking use.
The 1/4 inch shank means this bit is suited to routers equipped with 1/4 inch collets, aligning it with many profiling and trim router setups.
This Bosch wavy edge router bit, identified as part number 85606M with a 1-1/4 inch diameter and 1/4 inch shank, offers a defined carbide tipped profile for edge shaping. The ball bearing pilot guides the cut along stock edges, so the profile tracks cleanly on straight or curved runs. As a Profiling router bit, it serves when a distinct wavy contour is needed rather than a plain edge, helping standardize that look across multiple components once the bit is set up in your router.
Sold In: 1 Each