10.5mm x 20mm Drawer Front Adjusting Screw, White, Box of 250

Drawer Front Adjusting Screw For Precise Alignment

drawer front adjusting screw from Peter Meier, Inc. is designed so that instead of removing the drawer repeatedly to move the adjustment screw in the slides, the adjusting is done by moving the drawer front itself, which streamlines fine-tuning on install. This 10.5mm x 20mm Drawer Front Adjusting Screw, White, Box of 250 uses a nylon cam with a steel threaded floating insert, so the cam provides smooth cam action while the steel insert carries the #8-32 thread, supporting repeatable adjustment. The fitting allows about 1/4 inch of movement up or down and left or right, giving practical range to correct small reveal and gap issues without reworking the slide position. The 20 mm diameter cam presents a broad bearing surface, which helps distribute load across the sub-front material during adjustment. The #8-32 thread machine screw interface ties into common hardware practice, supporting consistent fastening patterns across a job.

Key Drawer Front Adjuster Details For Installers

• The fitting allows about 1/4 inch of movement up or down and left or right, which gives working range to bring faces into line after the slides are set, reducing time spent on tear-down and reinstallation.
• Instead of removing the drawer repeatedly to move the adjustment screw in the slides, the adjusting is done by moving the drawer front itself, which keeps the slide position fixed and shifts the fine work to the visible front.
• The cam accepts #8-32 thread machine screws, so it mates with a standard machine screw thread, allowing installers to match this adjuster with commonly used #8-32 fasteners on shop-built drawers.
• Material: Nylon cam with steel threaded floating insert means the cam body handles rotation while the steel insert carries the thread, which supports durable engagement under repeated adjustments in normal drawer use.
• Specifications: 20 mm diameter defines the footprint of the cam in the sub-front, which helps planners size the bore and keep edge distances appropriate for the material being used.

Drawer Front Adjustment Workflow At Installation

With this drawer front adjusting screw, all of the slide screws can be installed at the shop, not the job site, so crews can lock in slide positions during fabrication and reserve only front alignment for field work. Because the adjusting is done by moving the drawer front itself, installers can leave the slide-mounted components untouched, which keeps the box and runner geometry as built. The fitting allowing about 1/4 inch of movement up or down and left or right lets the installer shift the drawer front in two axes, helping dial in consistent reveals across a run. Using a nylon cam with a steel threaded floating insert allows the machine screw to find its best position within the cam, supporting smoother adjustment when tensioning the front against the sub-front.

How This Drawer Front Adjuster Works On The Job

Where This Drawer Front Adjusting Screw Is Applied

This 10.5mm x 20mm Drawer Front Adjusting Screw, White, Box of 250 is used with drawer fronts where instead of removing the drawer repeatedly to move the adjustment screw in the slides, the adjusting is done by moving the drawer front itself, so the front-to-box relationship becomes the main tuning point. The fitting allows about 1/4 inch of movement up or down and left or right, which suits applications needing small corrections in both vertical and horizontal directions across banks of drawers. Because the cam accepts #8-32 thread machine screws, this adjuster fits projects built around machine-screw-fastened drawer fronts, tying into a familiar fastening method on shop-assembled casework. Using a nylon cam with steel threaded floating insert means the adjuster serves where a rotating cam component must work against a fixed sub-front, giving fabricators flexibility in lining fronts to surrounding faces.

Why These Adjustment Details Reduce Rework Time

Instead of removing the drawer repeatedly to move the adjustment screw in the slides, the adjusting is done by moving the drawer front itself, which reduces handling of the drawer box and helps keep slide alignment as originally installed. The fitting allowing about 1/4 inch of movement up or down and left or right gives installers a defined adjustment window, so they can correct typical reveal deviations without slotting or relocating slide fasteners. The cam accepts #8-32 thread machine screws, letting the same thread standard carry both structural fastening and adjustment, which simplifies planning when laying out drawer front hardware. The reverse barb design of the cam provides a tight fit and retards the chance of the cam pulling out, helping the adjuster stay seated in the sub-front during adjustment cycles. The 20 mm diameter of the cam, combined with the nylon cam with steel threaded floating insert construction, provides a stable bearing area and robust thread support, which is significant when fine-tuning multiple fronts during final alignment.

Common Drawer Front Adjusting Screw Questions

Selecting This Drawer Front Adjuster For Your Jobs

This 10.5mm x 20mm drawer front adjusting screw from Peter Meier, Inc. is built so that adjusting is done by moving the drawer front itself, which concentrates alignment work where it is most visible. The fitting allowing about 1/4 inch of movement up or down and left or right gives installers control over fine positioning of drawer fronts relative to adjoining faces. With a nylon cam with steel threaded floating insert and a 20 mm diameter cam that accepts #8-32 thread machine screws, this adjuster integrates into standard machining and fastening routines. For projects where all of the slide screws are installed at the shop, not the job site, this drawer front adjusting screw supports efficient field tuning of drawer fronts to the finished opening.