
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Natural Elegance knob in Sterling Nickel gives cabinets and furniture a 1-1/4 inch (32 mm) diameter hand-grip that feels consistent from job to job, which helps installers deliver predictable alignment across doors and drawers in a run. The knob is part of the Natural Elegance Collection, so its organic, nature-influenced design supports projects that call for decorative hardware with a hand-crafted look while still using standard boring patterns. The knob uses zinc die-cast construction, giving a solid metal feel that suits everyday cabinet use in kitchens, baths, and built-ins. A Sterling Nickel finish on the knob provides a neutral, brushed-metal appearance that coordinates with many hinge and pull finishes on site. The Amerock BP1337G9 manufacturer part number clearly identifies this exact design, diameter, and finish when matching to existing layouts.
The Amerock Natural Elegance series knob BP1337G9 uses an 8-32 screw thread, giving installers a familiar machine-screw interface that matches standard cabinet knob boring practices. The specified 8-32 x 1 inch screw size works with typical 3/4 inch cabinet fronts, so installers can drill a straight through-hole and use the listed screw length to secure the knob without extra measurement steps in many common cabinet constructions. With a 1-1/4 inch diameter and 1-1/16 inch projection, the knob sits far enough from the face for easy hand clearance while staying tight to the door or drawer front to limit snag points in traffic paths. The 5/16 inch base diameter focuses bearing pressure near the mounting hole, which helps the knob register in a consistent spot against the surface during final tightening.
This Amerock Natural Elegance series knob in Sterling Nickel fits cabinet and furniture applications where a 1-1/4 inch diameter pull point is desired, making it suitable for doors and drawers throughout kitchens, baths, and built-in storage. The decorative design is influenced by organic, nature-inspired forms from the Natural Elegance Collection, so it supports projects targeting a softer, hand-crafted hardware look. Its Sterling Nickel finish gives a neutral metallic tone that coordinates with a wide mix of hinge and pull finishes from various lines, helping maintain a unified appearance when other hardware on the job also uses nickel-style finishes. Because the knob is categorized under decorative hardware and moldings in the knobs class, it aligns with use on finished cabinetry rather than rough carpentry, matching expectations for visible, touchable hardware.
The BP1337G9 knob uses a clearly defined 1-1/4 inch diameter and 1-1/16 inch projection, so installers can standardize drilling locations knowing the hand clearance and visual proportion will repeat exactly on each opening. The 8-32 screw thread and 8-32 x 1 inch screw length provide a familiar fastening approach, reducing setup time when switching between hardware pieces that share the same thread standard across a shop or jobsite. The 5/16 inch base diameter allows the knob to seat accurately around the mounting hole, which supports square, aligned installation when tightening, especially on narrow rails or slim drawer fronts. Zinc die-cast construction delivers a consistent casting from piece to piece, so multiple BP1337G9 knobs across a kitchen or commercial millwork run will match in size and feel. The Amerock manufacturer part number BP1337G9 serves as a precise reference when reordering or matching existing installations, supporting long-term hardware continuity in remodel or expansion work.
The Amerock BP1337G9 knob has a 1-1/4 inch (32 mm) diameter, 1-1/16 inch projection, 1-1/4 inch width, and a 5/16 inch base, giving clear sizing for cabinet layout and proportion decisions.
The knob uses zinc die-cast construction, providing a solid metal body that suits everyday cabinet door and drawer use in residential and similar environments.
The Amerock BP1337G9 knob has a Sterling Nickel finish, giving a soft metallic look that works well with many nickel-tone hinges, pulls, and other visible cabinet hardware.
The knob uses an 8-32 screw thread with a specified 8-32 x 1 inch screw size, aligning with standard cabinet knob installation practices through common 3/4 inch fronts.
The 1-1/16 inch projection allows fingers to grip behind the knob comfortably while keeping it close enough to the face to limit snagging in tight walkways.
The Natural Elegance Collection uses organics influenced by nature with hand-crafted and intricate design, supporting decorative cabinet projects that call for a softer, organic hardware look.
The Amerock Natural Elegance series knob BP1337G9 in Sterling Nickel pairs a 1-1/4 inch diameter with a 1-1/16 inch projection, giving a known hand-grip profile that fits many cabinet and furniture layouts. Its zinc die-cast construction and 5/16 inch base diameter support consistent seating against doors and drawers, while the 8-32 x 1 inch screw specification aligns with standard drilling on typical cabinet fronts. The Sterling Nickel finish and nature-inspired Natural Elegance styling provide a coordinated decorative hardware option when matching existing nickel-tone components. For projects calling for this exact combination of dimensions, finish, and design, the BP1337G9 part number from Amerock Corporation delivers a clearly defined solution.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMTMP-MULTI Mfr# TMPMULTI | Door/Drawer Hardware Installation Template |