Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Sugatsune TY-35-15 is a single-prong wire hook in Polished Stainless Steel, built from 304 stainless steel and rated to 15.4 pounds by the manufacturer. At 2-1/32 inches in length, it sits in the middle of the TY series range, offering a reach suited to items that need more clearance than a short hook provides without the deeper projection of the longest model.
Hook length determines what actually hangs comfortably and what does not. The 2-1/32 inch prong on this model clears a cabinet door face, a locker wall, or a closet panel enough to accept folded items, small bags, and handled objects without pinching them flat against the surface. It is the length that works where a very short hook would hold things too tight to the wall and a longer one would reach further into the space than the application requires. Think of a utility cabinet interior, a workshop tool bay, a locker room, or a back-of-door installation where the hanging depth needs to be deliberate rather than generous.
The hook is formed from 304 stainless steel, a grade chosen across the TY series for its strength-to-diameter ratio in wire form. The Polished Stainless Steel finish is a bright, mirror-adjacent surface that reads as a clean silver tone. On a wire hook this small, the finish is mostly what the eye registers, and the polished surface catches light in a way a brushed or matte finish does not. The 304 stainless designation comes from the SAP source data and is consistent with the material type listed in the product attributes.
This model suits anyone who needs a published load rating rather than an estimated one. Most decorative hooks in this category carry no rated capacity, which means a buyer is left guessing. The 15.4 pound figure here comes from the manufacturer and applies specifically to this model, making it a more defensible choice for a professional installation, a shared workspace, or a setting where the hook will be loaded consistently rather than occasionally. Cabinet shops outfitting a finishing area, contractors specifying utility storage in a built-in, and designers selecting hooks for a mudroom or locker installation all benefit from knowing the number rather than approximating it.
The manufacturer rates this hook to 15.4 pounds. That figure is specific to the TY-35-15 model.
The material is listed as stainless steel and the SAP data identifies it as 304 grade. The hook is formed wire, so the same material runs through the prong and the mounting section.
This is the middle length in the TY series offered here. The shorter model is 46 mm and the longer is 59 mm. Choose based on how far the hook needs to reach from the mounting surface for the items you are hanging.
Height here is the vertical dimension of the hook body itself, 15/16 inch (23 mm). It describes the hook's profile, not its projection.
Choose the TY-35-15 when the application calls for a middle-length hook with a published capacity and a construction that will read the same on day one as it does a year later.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLTY-40-15 Mfr# TY-40-15 | Sugatsune 58.5mm x 27mm L Hook, TY-40-15 | ||||
Sold in: 1 Each |  SLTY-30 Mfr# TY-30 | Sugatsune 46.2mm x 20mm L Hook, TY-30 |