
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune single push latch gives cabinet doors a push-to-open and push-to-close action, so doors latch and unlatch without a handle. The push to latch/unlatch function lets doors stay shut under a defined retaining force, then release with a simple push, which helps streamline cabinet fronts in shops, offices, or residential work. The touch latch allows the door to pop out when the door is pushed in, so the user gets a controlled opening motion instead of a hard pull. Constructed of ABS plastic, the housing stays lightweight while providing a stable body for the internal mechanism during repeated door cycles. The black finish helps the latch blend into darker cabinet interiors where visible hardware is not desired. As part of Sugatsune Americas latch line, the MC-28/BLK model fits typical cabinet and furniture applications where a compact touch latch is required.
This push latch uses a touch latch with floating strike, so the strike can shift slightly to engage the catch and compensate for small door or frame alignment differences. The catch size of 37 mm length by 36.3 mm width defines the footprint needed on the cabinet surface, helping plan mounting clearances around hinges or adjacent hardware. The strike size of 26 mm length by 13.2 mm width sets the required space on the door, which matters when locating it behind narrow rails or thinner profiles. A 3 mm, or 1/8 inch, space must be allowed for push in release, giving the latch enough travel to disengage and then push the door outward. For an overlay door, allowing a 3 mm gap between the door and cabinet frame provides the same push space so the touch latch can operate correctly without binding.
The MC-28/BLK push latch is designed for cabinet and furniture doors where a handle-free, push-to-open action is desired. Its category as a latch within locks and latches, and bolts, hasps and latches positions it for general cabinet hardware layouts. The compact catch size of 37 mm by 36.3 mm and smaller strike size of 26 mm by 13.2 mm help it fit into tight interior clearances, such as behind face frames or in frameless constructions with limited mounting area. The black finish pairs well with darker interiors, where a light-colored component might distract from the cabinet design. Because the touch latch allows the door to pop out when pushed in, it serves well on doors that need a slight projection on opening for finger access.
The specified 3 mm, or 1/8 inch, space for push in release gives the latch enough travel to disengage and drive the door outward, so planning that gap into the layout keeps the touch function consistent from door to door. On overlay doors, allowing a 3 mm gap between the door and cabinet frame gives the same travel room, supporting smoother operation when multiple doors share a continuous reveal. The retaining force of 6.6 lbs defines how firmly the door is held closed, which helps match door weight and usage patterns to the latchs holding ability. The note that constant loading of over 3 kg or excessive pushing or pulling is not recommended sets a practical upper range on door loading, helping align this latch with lighter cabinet doors rather than heavily loaded panels. Avoiding pulling the door with excessive force without unlatching the unit helps protect the internal mechanism so the push to latch/unlatch action remains consistent over many cycles.
The Sugatsune single push latch uses a push to latch/unlatch touch mechanism, so pushing the door in engages or releases the latch and allows the door to pop out for easy opening.
The MC-28/BLK push latch requires a 3 mm, or 1/8 inch, space for push in release, which provides the travel needed for the latch to disengage and push the door outward.
The black touch latch can be used on overlay doors when a 3 mm gap is allowed between the door and cabinet frame, which provides the necessary push space for proper touch latch function.
This ABS plastic push latch has a catch size of 37 mm length by 36.3 mm width and a strike size of 26 mm length by 13.2 mm width, guiding placement on cabinet and door surfaces.
The MC-28/BLK push latch provides a retaining force of 6.6 lbs, which keeps the door closed under moderate contact while still allowing it to open with a deliberate push.
The Sugatsune MC-28/BLK latch is not recommended for constant loading of over 3 kg, which aligns it with lighter cabinet doors rather than heavily loaded panels.
The Sugatsune single push latch MC-28/BLK provides a defined push to latch/unlatch action, a floating strike for easy alignment, and a 6.6 lb retaining force, all in an ABS plastic housing with a black finish. Its specified catch and strike sizes, along with the required 3 mm push space, give clear layout parameters when planning face frame or overlay cabinet doors. For projects that call for clean fronts and touch-to-open doors, this touch latch configuration offers a practical way to control door closure and release within documented loading and gap requirements.
Sold In: 1 Each