
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Midway Series knob gives cabinets a clear lucite pull point that reads clean and modern on the door face. The 1-1/4 inch diameter head defines a consistent grip area, which helps doors and drawers feel uniform across a run. The 1-3/8 inch projection spaces fingers off the face, which matters when users pull near adjacent fronts or tight reveals. The knob comes from the Eclectic collection, so it suits projects that mix styles while keeping a single knob profile. Material is zinc die cast with a lucite finish, so the underlying metal provides structural support while the clear look presents as a neutral design element. The 9/16 inch base diameter keeps the footprint compact, which can be useful on narrow rails or small drawer fronts. Brand identification is Belwith Keeler, giving installers a defined manufacturer reference when matching other hardware.
The knob uses an 8-32 x 1 inch screw, so it fastens through a drilled cabinet hole into the knob body for a secure mechanical connection. The 1-1/4 inch diameter defines the footprint around that bore, which helps installers plan clearances to stiles, rails, and neighboring hardware. Projection at 1-3/8 inch sets how far the gripping surface stands off the front, which interacts with door swing and adjacent fronts in tight reveals. The 9/16 inch base diameter means the contact area against the cabinet face stays compact, which supports use on small drawer fronts without overpowering the panel. Being part of a knob product class under decorative hardware and moldings, it is set up for cabinet and furniture door roles where a single fastener knob is standard.
This knob is defined by a 1-1/4 inch diameter and 1-3/8 inch projection, which suits cabinet doors and drawers that need a consistent handhold without extending too far into walk paths. The 9/16 inch base diameter keeps the contact ring small, so it fits comfortably on narrow face frames or smaller drawer heads that cannot take a wide footprint. Belwith Keeler branding and the Hickory Hardware Midway Series identity connect it to a decorative hardware family, which is useful when tying this knob into broader knob and pull layouts on a project. The Eclectic collection designation positions the clear lucite finish as a flexible visual element, which helps the knob sit alongside different finishes on hinges or adjacent hardware without dominating the look. The zinc die cast material under the lucite surface defines it as a metal-based knob, which supports repetitive cabinet opening cycles common in kitchens and storage runs.
The 8-32 x 1 inch screw specification sets a known thread and length, which simplifies swapping this knob onto doors or drawers already drilled and tapped for that cabinet standard. The 1-1/4 inch diameter and matching width make the knob a true round form, which helps installers center it visually on rails or drawer fronts without dealing with directional orientation. A 1-3/8 inch projection defines the stand-off dimension, so when repeated on every front the line of knobs reads even and consistent from side views along the run. The 9/16 inch base diameter sets the bearing surface size against the cabinet, which keeps the imprint modest if hardware positions move during future layout changes. The manufacturer part number P705-LU gives a precise ordering reference, which aids service work and future matching when additional knobs are needed on the same installation. Being categorized under knobs, Belwith, associates it with a known decorative hardware group, which helps shops align it with other Belwith Keeler options during specification.
The P705-LU knob has a 1-1/4 inch diameter, 1-1/4 inch width, 1-3/8 inch projection, and a 9/16 inch base diameter, giving installers clear layout and clearance reference points.
The knob uses zinc die cast material with a lucite finish, combining a metal core for structural support with a clear appearance suited to varied cabinet styles.
The P705-LU knob uses an 8-32 x 1 inch screw, tying it to a common cabinet hardware thread standard for straightforward mounting and future replacement.
The Hickory Hardware Midway Series knob has a 1-3/8 inch projection, setting the hand clearance away from the door or drawer face during normal use.
The knob is from the Eclectic collection under the Belwith Keeler brand and is identified within the Hickory Hardware Midway Series decorative hardware family.
The 9/16 inch base diameter keeps the contact point compact, supporting use on narrow rails or small drawer fronts without visually crowding the panel.
The Hickory Hardware Midway Series knob, part number P705-LU, brings a clear lucite look with defined measurements that translate cleanly into shop drawings and field layouts. With 1-1/4 inch diameter, 1-3/8 inch projection, and a 9/16 inch base diameter, it offers predictable sizing for cabinet doors and drawers. The zinc die cast material with lucite finish gives a neutral visual while relying on a metal core. When a project calls for a Belwith Keeler decorative knob from the Eclectic collection, this clear option aligns measurements and style in a single, repeatable choice.
Sold In: 1 Each