Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Selby reversible hinge 270 degree describes a screw-on overlay door hinge from Selby Furniture Hardware that is built to open to a 270 degree angle, so doors can swing well past 180 degrees for wide, unobstructed cabinet access. This hinge is classified as a semi-concealed hinge in the specialty hinges category, so part of the hardware remains visible while most of the mechanism stays out of sight for a cleaner cabinet face. The reversing hinge design lets you pull the pin and reverse the leaf to create a flush door hinge setup, giving flexibility to handle either overlay or flush applications with the same part on the job. The hinge has a bright nickel finish described as HINGE, BRIGHT NICKEL, providing a clean metallic look that coordinates with other nickel hardware in the project.
This reversible overlay door hinge uses a screw-on installation method, so the hinge is fastened directly to the cabinet and door using the recommended WW40000 fasteners, giving a straightforward, mechanical mount for woodworking projects. Because the opening angle is specified at 270 degrees, hinge placement can be planned so the door clears adjacent faces and hardware as it wraps back alongside the cabinet. The semi-concealed hinge classification indicates that part of the hinge is accessible after mounting, so alignment checks and adjustments can be approached visually during layout. The ability to pull the pin and reverse the leaf to convert to a flush door hinge lets the same screw positions support different door conditions when matching surrounding cabinetry.
The Selby H98N hinge is described as an overlay door hinge in the specialty hinges category, so it is suited to cabinets or furniture where the door overlays the face frame during normal use. Because the Web Description notes that pulling the pin and reversing the leaf changes it into a flush door hinge, the same hardware also fits applications where the door sits flush with the cabinet front, allowing consistent hardware selection across different cabinet styles. Its classification as a semi-concealed hinge means the hinge works in situations where a fully hidden hinge is not required, but a lower-visibility profile than a fully surface-mounted hinge is preferred. The bright nickel finish supports projects where nickel-tone hinges are used as a visible design element that matches other bright nickel components in the installation.
The stated opening angle of 270 degrees allows doors mounted on this hinge to swing significantly past a standard 90 or 110 degree opening, so the door can fold back alongside the cabinet structure and clear the working area in front of shelves or interior hardware. For installers, this wide-swing behavior means hinge location can be chosen to maximize access to cabinet interiors while still relying on the same Selby H98N part for multiple door orientations. The reversing hinge description specifies that pulling the pin and reversing the leaf converts it from an overlay door hinge to a flush door hinge, so a single hinge type can serve both conditions without changing part numbers during fabrication or installation. The 0.054 gauge detail indicates the hinge leaf thickness, tying the part to a particular material cross-section that supports repeatable mortise or layout expectations when this gauge is used consistently across a run of doors.
The H98N hinge is described as an overlay door hinge, so it is intended for doors that overlay the cabinet or frame in the primary configuration.
The Web Description states that pulling the pin and reversing the leaf turns the overlay door hinge into a flush door hinge, so the same part serves both layouts.
The Selby H98N hinge has an opening angle of 270 degrees, allowing the door to swing back alongside the cabinet for wide interior access.
The hinge is described as a screw-on overlay door hinge, so it is fastened with screws through the hinge leaf into the cabinet and door structure.
The Web Description lists Recommended Fasteners as WW40000, so that fastener matches the referenced installation setup for this hinge.
The hinge gauge is listed as 0.054, indicating the described leaf thickness that relates to its strength and fit in typical cabinet work.
The Selby H98N hinge from Selby Furniture Hardware provides a reversible overlay and flush door solution with a 270 degree opening angle, so one semi-concealed hinge style can handle varied cabinet layouts in a shop or onsite. Its bright nickel finish and 0.054 gauge construction give a defined look and material thickness that align with the Web Description details. With Recommended Fasteners identified as WW40000 and a screw-on mounting style, this reversible hinge is specified to integrate directly into woodworking projects that call for specialty hinges. Use this Selby reversible hinge 270 degree configuration when a single part number that supports both overlay and flush doors with wide opening travel is needed for consistent cabinet hardware planning.
Sold In: 1 Pair