Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1/4" x 1" glide track from EPCO provides a compact sliding door guide that supports smooth travel along the floor line. The nylon glide is designed for use with 810 kerf track, so it works as part of a matched sliding door system. This non-locking glide keeps the door moving freely without a hold-closed feature, which suits doors that need regular, easy access. The glide mounts into a mortise at each end of the door, so the hardware remains tucked into the door bottom. Its white finish supports a clean look at the floor interface, which matters on finished architectural work. As part of EPCO's value line of sliding door components, this piece is aimed at practical, everyday door runs where installers want straightforward parts that perform as specified.
Simple installation by press-fitting the plastic track into a 1/8" wide saw kerf means installers prepare a consistent groove and then drive the track in without separate retainers. Glides are mortised into the bottom of the door, so the door edge stays flush while the guide rides within the track. The glide mounts easily into a mortise at each end of the door, which sets the guiding points where the door needs support. A recessed brad secures the glide, so the fastener head stays below the working surface and does not interfere with travel inside the 810 kerf track. This combination of press-fit track and mortised glide supports a straightforward, repeatable installation sequence on shop-built doors.
This glide is part of EPCO's value line of sliding door components, so it fits general sliding door hardware projects rather than specialty locking applications. The nylon glide for use with 810 kerf track is sized for that specific kerf profile, so it works in door bottoms where an 810-style plastic track is press-fitted into a 1/8" wide saw kerf. The 1/4" projection dimension indicates how far the glide projects into the track zone, which positions the door properly over the guide. A 1" length provides enough bearing surface to guide the door at each end while remaining compact for standard-width stile sections. The white color and architectural collection context make it suitable for visible interior openings where appearance around the floor edge matters alongside function.
The nylon material in the glide provides a low-friction contact surface against the 810 kerf track, so the assembly delivers the smooth gliding action described in the product data. Because installation is free from moving parts to clog or jam, the guide relies on a fixed nylon body sliding in the fixed plastic track, which reduces points where dust could interrupt performance. Mounting the glide into a mortise at each end of the door sets two controlled guide points, helping the door track straight rather than wandering along the opening. Securing the glide with a recessed brad locks the component into the mortise while keeping the fastener protected from contact with the track walls. Using a press-fitted plastic track in a 1/8" wide saw kerf establishes a consistent channel, so the glide engages the same way across multiple doors in a run, supporting predictable alignment and clearances from shop build through site installation.
This product is part of EPCO's value line of sliding door components, so it functions as a non-locking glide in sliding door hardware assemblies.
The glide is mortised into the bottom of the door at each end and is secured by a recessed brad, so it sits flush while staying mechanically fixed in place.
The nylon glide is for use with 810 kerf track, so it is dimensioned to run inside that specific plastic track profile.
The plastic track is press-fitted into a 1/8" wide saw kerf, so the track locks into the groove without separate retainers along the opening.
As a non-locking glide, this component allows the door to move freely without a hold-closed position, which suits doors needing easy, frequent access.
The white nylon material provides smooth gliding action in the 810 kerf track and maintains a neutral, clean appearance at the bottom of the door.
The EPCO 1/4" x 1" glide track with white nylon glide is built for sliding door projects using 810 kerf track and a 1/8" wide saw kerf. Its non-locking, smooth gliding action suits everyday openings where consistent travel matters more than latching. With mortised mounting at each end of the door and a recessed brad, the guide becomes part of the door construction rather than a surface add-on. For shops and installers working with EPCO's value line of sliding door components, this glide offers a matched part that keeps doors running cleanly along the floor interface.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  EP751-1 Mfr# 751 | 1/4" x 1" Snap-In Glide Track, White Finish | ||||
Sold in: 1 Roll |  EP810 Mfr# 810 | Single Channel Tracks Plastic Kerf Tracks and Glides for Lightweight Doors, 100' |