
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Outwater Industries tambour track is a brown plastic track system designed as tambour door track hardware for appliance garages and similar cabinet applications. The track is part of a value line, so it supports cost-conscious jobs where a reliable channel for the slats is still required. Two track and curve type pairings are available: OW4C51 with OW4T5C for tambour material 1/8 to 3/16 inch thick, and OW4C55 with OWT54 for material 1/4 to 5/16 inch thick, which allows matching the channel to the door thickness for smoother movement. The 4T5C-48 designation identifies this piece as a 48 inch brown track in the system. Outside dimensions of both track types are identical, so the cabinet layout stays the same when using different material thickness ranges. This consistency can simplify layout, routing, and repeat builds across multiple cabinets.
The tambour track and curves are attached to cabinetry with screws or staples through the track's leading edge, so the fasteners pull the track tight along the mounting surface for a secure guide path. This leadingedge fastening approach helps keep the visible interior cleaner because the fixation is handled along one edge of the profile. A tab on the curve track piece fits into a slot on the straight track piece, which mechanically locks the straight and curved sections together and keeps the alignment consistent through the turn. The track and curves must be lubricated with a spray lubricant such as spray silicone, so the tambour material can glide with reduced friction and less resistance over time.
This tambour door track hardware is classified under appliance garages and tambour doors, so it is oriented to kitchen and bath cabinet installations where a rolling door needs to travel in a confined path. The 48 inch brown plastic track length suits common cabinet spans, allowing installers to run the guide along the side or top of the tambour compartment. The OW4C51 and OW4T5C combination is designed for tambour material 1/8 to 3/16 inch thick, giving a suitable channel size for thinner door slats used in compact appliance garages. The OW4C55 and OWT54 pairing is designed for tambour material 1/4 to 5/16 inch thick, which supports thicker slats or heavier door constructions within the same outside footprint. Because outside dimensions for both track types are identical, a shop can standardize cabinet cut geometry and then choose the correct internal channel based on the selected tambour material thickness.
The brown plastic construction of the Outwater Industries tambour track offers a continuous molded surface for the slats to ride against, which supports consistent sliding behavior across the full door travel. The requirement to lubricate the track and curves with a spray lubricant such as spray silicone directly reduces friction between the tambour material and the channel, which helps prevent binding and can keep the door movement lighter under everyday use. The tab on the curve track piece that fits into a slot on the straight track piece locks the run together at the transition, so the tambour moves through the curve without a step or gap at the joint. Attachment to cabinetry with screws or staples through the track's leading edge keeps fasteners out of the active sliding path, letting the tambour travel inside a clean channel. These design choices support more predictable movement and repeatable results when multiple appliance garages are built to the same standard.
The 4T5C-48 system uses OW4C51 with OW4T5C for tambour material 1/8 to 3/16 inch thick, and OW4C55 with OWT54 for 1/4 to 5/16 inch, matching channel size to slat thickness.
The Outwater Industries tambour track is attached to cabinetry with screws or staples through the track's leading edge, pulling the profile firmly against the mounting surface.
The tambour track and curves must be lubricated with a spray lubricant such as spray silicone, reducing friction so the tambour material moves smoothly through straight runs and curves.
A tab on the curve track piece fits into a slot on the straight track piece, mechanically tying the sections together and maintaining alignment at the transition.
Both tambour track types share identical outside dimensions, allowing the same cabinet cutouts while choosing the internal channel that matches the tambour thickness range.
The brown plastic tambour track provides a uniform molded channel, supporting consistent sliding of the tambour slats along the guide in daily cabinet operation.
This brown plastic tambour door track hardware from Outwater Industries, identified as 4T5C-48, offers a value line option for appliance garages and tambour doors where channel size must match specific material thickness ranges. With dedicated pairings for 1/8 to 3/16 inch and 1/4 to 5/16 inch tambour thicknesses, identical outside dimensions, and fastening through the leading edge using screws or staples, the track supports straightforward cabinet layouts and repeatable installations. For projects needing controlled cost and consistent tambour door travel, this 48 inch brown track provides a focused solution built around appliance garage and cabinet tambour applications.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | OW4C51 Mfr# 4C51 | Outwater Industries Tambour Track Curve 2-5/8"W x D, Plastic - 4C51 | ||||
Sold in: 1 Each | OW4C55 Mfr# 4C55 | Outwater Industries Tambour Track Curve 2-5/8"W x D, Plastic - 4C55 | ||||
Sold in: 1 Each | OW4T54 Mfr# 4T54-BR-4 | Outwater Industries Tambour Track 1-1/32"W x D, Plastic - 4T54-BR-4 |