Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 20 inch (505mm) steel side rail from Grass's Zargen 6100 drawer system, finished in White epoxy. It forms the structural wall of a Zargen drawer box and is the component you order when building new drawers or replacing a side rail in an existing Zargen installation.
The Zargen drawer system replaces traditional wood drawer sides with formed steel profiles. The side rail is the backbone of that build: it carries the bottom panel, connects to the back, and receives the front fixing that attaches the drawer face. Every other Zargen component — runner, back, hook dowel, cover cap — is sized and engineered around the nominal length and side height you choose. At 505mm (20 inches), this rail pairs with 20 inch Zargen runners and a 20 inch back to complete one side of the box. Two rails are required per drawer.
The 30mm profile height positions this rail in the low-profile tier of the Zargen range, which suits cutlery drawers, shallow upper drawers, and any application where a taller side would crowd the contents above.
The rail is formed from steel and coated in a White epoxy finish. The epoxy coat provides a consistent, hard surface that holds up to the contact a drawer side sees in daily kitchen or shop use. White pairs cleanly with white-painted cabinet interiors, white melamine drawer boxes, and the standard White finish offered across the Zargen accessory line, so the installed box reads as a unified system rather than a mix of components.
Cabinet shops running a production kitchen program in white benefit from stocking Zargen rails at the lengths they use most — drawers tend to cluster around a few standard depths, and having the right rail on hand keeps assembly moving. The 20 inch length suits base cabinets with a standard 21 to 22 inch box depth when paired with the corresponding runner and front gap. Renovation contractors retrofitting white-finish cabinetry with a metal drawer system will find the White epoxy matches most existing painted interiors without a finishing step. Designers specifying handle-less kitchen fronts on a Zargen platform can rely on this rail as the foundation component before adding the front fixing and cover caps.
Two — one for each side of the box. This listing is for a single rail; order in pairs to complete one drawer.
No. Zargen components are sized by nominal length and must match. A 505mm (20 inch) side rail pairs with 505mm runners and a 505mm back. Mixing lengths produces a box that will not assemble correctly.
No. The Zargen side rail is engineered specifically for the Grass Zargen system. Front fixings, backs, runners, and cover caps from other brands are not interchangeable with Zargen components.
Yes — White is a standard Zargen finish carried across runners, backs, and accessories, so matching components in the same nominal length are available in this finish.
Front fixings and cover caps for the Zargen system are Zargen-specific and sold separately. Specify the Zargen 6100 series components that correspond to this rail's side height and nominal length.
Getting the side rail right — correct nominal length, correct height, correct finish — means every downstream Zargen component drops into place without a second order. This 20 inch White rail is the starting point for a clean, production-ready Zargen drawer build.
Sold In: 1 Each
