Grass Zargen Drawer Systems Metal Railing System, Back Partition Clips
Description
Grass Zargen Back Partition Clips For Drawer Systems
Grass Zargen back partition clips are designed for use with Grass Zargen drawer systems, so they tie directly into the Grass Zargen drawer system layout that many shops already build around. The clips are part of the Grass Zargen drawer systems metal railing system, which means they work as a dedicated connection point between the metal sides and a back partition. That keeps partitions aligned with the Grass Zargen drawer system geometry, which helps maintain consistent spacing from drawer to drawer. The 97480-39 back clip detail identifies this specific clip version, giving installers a precise reference when matching to Grass Zargen drawer construction documents. The manufacturer part number F145097480111 ties the clip to Grass America sourcing, which supports repeat ordering when the same drawer system configuration is needed across multiple jobs.
Back Partition Clip Details That Support Shop Work
- The SAP description "97480-39 BACK CLIP 4.2MM SCREW-ON WHITE" specifies a 4.2mm screw-on design, so installers can base their drilling and fastening steps around that 4.2mm interface for consistent fastening setups on Grass Zargen drawers.
- The same SAP description calls out a white finish, which lets cabinetmakers align clip color with light-toned Grass Zargen drawer interiors when appearance around the back partition matters on exposed or glass-front installations.
- Being identified as back partition clips in the Grass Zargen drawer systems metal railing system keeps the part clearly assigned to partition support, helping shops separate it from front or side components during planning.
- The web description notes that these back partition clips are sold in a screw-on version, confirming that installation is handled through screw fastening rather than press-in or tool-free methods, which can match existing tool setups in many shops.
- The reference to Grass Zargen drawer systems in both the product name and web description confirms that these clips are intended to integrate into Grass Zargen drawer construction systems, supporting consistent drawer layouts across a full project.
Screw-On Back Clip Setup For Grass Zargen
The SAP description identifies a back clip 4.2mm screw-on design, so installers know the connection is handled through screw fixing at a 4.2mm interface, which simplifies planning of drill patterns and bit selection for repeatable mounting. The product name describes these as back partition clips in the Grass Zargen drawer systems metal railing system, so their role is focused on securing a rear partition within that specific metal-sided drawer layout. The web description states that the clips are designed for use with Grass Zargen drawer systems, tying their fit and mounting points to an established Grass Zargen geometry that many woodworking shops already understand.
Using Grass Zargen Back Clips In Drawer Builds
Where These Back Partition Clips Are Applied
The product name identifies the parts as Grass Zargen drawer systems metal railing system back partition clips, placing them specifically in Grass Zargen drawer construction. That description signals that the clips are intended to connect a back partition to the Zargen metal railing system, giving the partition a defined support point at the rear of the drawer. Because the web description states that they are designed for use with Grass Zargen drawer systems, shops using Grass Zargen drawers can assign these clips wherever a rear partition is needed to divide storage space. The classification under Grass Zargen Drawer System in drawer construction systems further anchors their role inside that system, helping designers map partitions within the Grass Zargen framework.
Details That Help Maintain Consistent Drawer Layouts
The SAP description "97480-39 BACK CLIP 4.2MM SCREW-ON WHITE" gives installers a clear label to follow on drawings and order lists, reducing confusion when multiple Grass components are specified on the same project. The 4.2mm screw-on description indicates that the fastening interface is dimensioned around 4.2mm, which supports consistent hole sizing and hardware selection across runs of Grass Zargen drawers that share the same back clip. Identifying the part as white lets builders coordinate the clip color with other white-toned Grass Zargen drawer elements where visible hardware near the partition edge matters. The manufacturer part number F145097480111 ties these details together into a single Grass America reference, enabling shops to repeat successful Grass Zargen drawer layouts by reordering the same back partition clip configuration for future jobs.
Common Questions About Grass Zargen Back Clips
What drawer system are these back partition clips designed for?
The Grass Zargen back partition clips are designed for use with Grass Zargen drawer systems, so they align with the established Grass Zargen drawer construction layout.
How do these Grass Zargen clips fasten to the drawer system?
The SAP description lists a 4.2mm screw-on design, meaning the Grass Zargen back partition clips fasten using a 4.2mm screw-based interface for secure attachment.
What does the 97480-39 designation on the back clip indicate?
The 97480-39 detail in the SAP description identifies this specific Grass Zargen back clip version, helping installers match it to drawings and repeat the same configuration.
What does the white description mean for cabinet appearance?
The SAP description states the Grass Zargen back partition clip is white, allowing shops to coordinate its color with light Grass Zargen drawer interiors where visible hardware matters.
How does the Grass America part number F145097480111 help ordering?
The manufacturer part number F145097480111 provides a precise Grass America reference, so shops can reorder the same Grass Zargen back partition clip for matching drawer runs.
How do these clips support partitions in Grass Zargen drawers?
The product name defines them as back partition clips for the Grass Zargen drawer systems metal railing system, so they serve as the connection point supporting a rear drawer partition.
Select Grass Zargen Clips For Consistent Drawer Builds
The Grass Zargen back partition clips identified as 97480-39 BACK CLIP 4.2MM SCREW-ON WHITE give shops a defined way to secure rear partitions within Grass Zargen drawer systems. With the Grass America part number F145097480111 tied to this specific back partition clip, repeat projects can use the same Grass Zargen drawer systems metal railing layout and maintain consistent drawer partitioning from job to job.