Hickory Hardware Sunnyside Polished Chrome 1-1/8" (29 mm) Diameter Knob, P213-26

Hickory Hardware Sunnyside Knob For Cabinets

Hickory Hardware Sunnyside knob gives cabinets and furniture a polished chrome 1-1/8 inch diameter pull point that is easy to grab and visually consistent across a run of doors or drawers. The Belwith Keeler Sunnyside Series design uses zinc die cast construction, which provides a solid metal feel that suits everyday cabinet door and drawer use. The polished chrome finish presents a bright, reflective surface that coordinates with other chrome decorative hardware on the same installation. A 1 inch projection sets the hand clearance off the cabinet face, helping fingers get behind the knob without crowding the door or drawer front. The 1/4 inch base diameter focuses contact at a small footprint on the face, supporting a clean look where the knob meets the surface.

Key Sunnyside Series Knob Details That Matter

• The zinc die cast material creates a metal knob body that supports consistent feel across multiple doors and drawers in the same project.
• The polished chrome finish provides a bright surface that visually aligns with other polished chrome decorative hardware on cabinets.
• The 1-1/8 inch diameter head offers a defined gripping area that helps hands control cabinet doors and drawers during everyday use.
• The 1 inch projection spaces the knob face away from the cabinet front, giving finger room between the knob and surface while pulling.
• The 1-1/8 inch width dimension matches the stated diameter, helping layout remain uniform when spacing multiple knobs along a run.
• The manufacturer part number P213-26 identifies this specific Sunnyside Series polished chrome knob when matching to drawings or reordering.

Installation Dimensions And Threaded Fit

This zinc die cast Sunnyside Series piece uses an 8-32 screw size, so the internal thread accepts standard 8-32 cabinet knob fasteners during mounting. The 1-1/8 inch diameter head size defines the coverage area on the cabinet face, which installers can reference when locating drill points relative to panel edges or profiles. With a 1 inch projection, the working depth from face to knob edge is known in advance, which helps when coordinating with adjacent hardware or tight reveals. The 1/4 inch base diameter shows how much of the surface will contact the cabinet, supporting predictable seating against flat faces.

Using This Polished Chrome Knob In Cabinet Work

Where The 1-1/8 Inch Knob Works Best

The 1-1/8 inch diameter knob design suits cabinet doors and drawers that call for a single pull point in the Sunnyside Series style. Its polished chrome finish ties into projects using other chrome decorative hardware, helping maintain a consistent appearance across kitchens, baths, or built-ins specified with this finish. The zinc die cast construction supports repeated hand use on frequently opened doors and drawers, matching typical cabinet traffic in residential or light commercial woodworking. Because the width and diameter are both 1-1/8 inch, installers can plan knob centerlines along rails or drawer fronts knowing the face size will present uniformly across the elevation.

Dimensional Details For Repeatable Results

The 1 inch projection gives a fixed stand-off from the cabinet face, which helps installers anticipate how far the knob extends into working space or walk paths. The 1/4 inch base diameter defines the contact circle at the mounting point, so its footprint remains tight on narrow rails or stile faces while still covering the fastener entry. The 8-32 screw size threading allows the knob to pair with standard 8-32 machine screws commonly used in cabinet construction, which supports straightforward attachment into predrilled holes. With manufacturer identification as P213-26 in the Sunnyside Series, shops and installers can specify or repeat this exact polished chrome knob across phases of a project.

Common Questions About The Sunnyside Chrome Knob

Selecting This Knob For Chrome Cabinet Runs

The Hickory Hardware Sunnyside knob in polished chrome P213-26 pairs zinc die cast construction with a 1-1/8 inch diameter and 1 inch projection, which supports consistent hand feel across cabinet doors and drawers. The 8-32 screw size threading aligns with standard cabinet knob installation practices for straightforward mounting. For projects calling for polished chrome decorative hardware, these defined dimensions and finish details help align design intent with field installation results.