Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Economy ABS Furniture Leveler provides height adjustment for wall units and furniture that need fine tuning after installation, so cabinets and work surfaces can be brought into line without rebuilding or shimming panels. This Camar furniture levelers design fits the cabinet and furniture levelers category, giving you a purpose-built leg leveller for work surfaces and tables that need ongoing adjustment. The 1 inch adjustable range from the leveler base lets you take up floor variations, which helps align doors, tops, and reveals across a run of units. As part of the leg levellers and toe kicks class, it supports furniture behind the scenes so the finished installation presents clean lines while still allowing later tweaks. This economy ABS construction keeps the part focused on functional adjustment, letting you correct uneven floors on site.
The Economy ABS Furniture Leveler is designed to attach directly to a panel, so the load path runs from the cabinet or furniture side down through the leveler into the floor. Two 3/16 inch dowels spaced 1-1/4 inch apart for line boring position the leveler in pre-drilled system holes, which speeds repetitive layouts and keeps each unit aligned relative to the next. Two holes for wood screws secure the leveler to the panel, helping maintain position during leveling and under long-term service loads. The leveler can be adjusted with a slotted screwdriver, so installers can reach in and set height while the cabinet or furniture is in place. With the leveler base extending 1 inch, there is enough vertical range to handle typical floor variations across most wall units and furniture runs.
Camar furniture levelers are described as perfect for wall units and furniture that require adjustment after installation, so they are suited to built-ins and casework that must be leveled once fixed to a wall or tied into adjacent pieces. The Economy ABS Furniture Leveler sits in the work surface and tables, cabinet and furniture levelers category, positioning it for base cabinets, casegoods, and similar furniture needing concealed height control. Because it attaches to a panel, this leveler supports cabinet sides, ends, or intermediate partitions directly, helping distribute loads through the case rather than relying on external feet. The 1 inch extension at the leveler base accommodates typical floor variation under wall units and furniture, helping maintain consistent reveals under toe kicks or along the bottom edges of finished pieces in both residential and commercial millwork environments.
The Economy ABS Furniture Leveler uses two 3/16 inch dowels spaced 1-1/4 inch apart for line boring, so once the boring pattern is set, each cabinet or furniture panel can receive the leveler in the same relative position, improving repeatability on multi-unit jobs. Two holes for wood screws combine with the dowels to locate and fasten the leveler, which helps keep settings stable once height is dialed in. The ability to adjust the leveler with a slotted screwdriver lets installers trim height from the front or underside using a common tool, reducing time spent changing drivers or setups. With the leveler base extending 1 inch, there is defined travel for raising or lowering the cabinet or furniture, allowing controlled adjustment instead of improvised shims. As a leg leveller within the leg levellers and toe kicks product class, it provides a structured method for supporting and fine-tuning work surfaces and tables over time.
The Economy ABS Furniture Leveler is a Camar furniture leveler in the leg levellers and toe kicks class, used to support and adjust cabinets, work surfaces, and furniture pieces.
This Camar furniture leveler is described as perfect for wall units and furniture that require adjustment after installation, so it fits casework and built-ins needing on-site leveling.
The Economy ABS Furniture Leveler attaches to a panel using two 3/16 inch dowels spaced 1-1/4 inch apart for line boring, along with two holes for wood screws for secure fastening.
The Economy ABS Furniture Leveler is adjusted with a slotted screwdriver, letting installers raise or lower the support point using a basic hand tool after installation.
The leveler base extends 1 inch, providing an adjustable range to compensate for common floor irregularities under cabinets, work surfaces, and furniture runs.
The Economy ABS Furniture Leveler is identified by manufacturer part number 302-P2-RA, which ties directly to the specific Camar adjustable leveler design.
The Economy ABS Furniture Leveler from Camar gives cabinet and furniture projects an integrated way to deal with uneven floors, using a panel-mounted design with dowels and wood screw holes for secure placement. Its 1 inch adjustable leveler base range allows installers to align wall units and furniture after installation, keeping reveals and work surfaces consistent without reworking case parts. Adjustment with a slotted screwdriver keeps on-site setup straightforward, especially when working along long runs of casework. For woodworking professionals sourcing from Wurth Baer Supply, this Camar 302-P2-RA leveler offers a dedicated option when a 1 inch adjustable leg leveller is required for work surfaces, tables, and cabinets.
Sold In: 1 Each