3M 248D PSA Sanding Disc 10" 60 Grit Aluminum Oxide X-Weight Cloth No Hole Bulk-10 51111496893
Description
3M 248D 10" PSA 60 Grit Sanding Disc Use
3M 248D 10" PSA 60 Grit Sanding Disc identifies a 10 inch pressure-sensitive adhesive sanding disc built around 60 grit aluminum oxide, so it targets more aggressive stock removal where a coarse cut is needed. The disc uses aluminum oxide as the abrasive, which delivers a sharp cutting action that helps strip material efficiently on demanding jobs. This abrasive is bonded to a heavy duty X-weight cloth backing, giving the disc a robust base that stands up to higher pressure passes in industrial or occupational sanding. The PSA backing is specified as PSA no hole backing only, so the entire disc surface stays available for contact where compatible PSA backup pads are used. The product is described as 3M 248D within a family that also references 348D, indicating it sits in a 3M abrasive line designed for more aggressive applications where consistent cut and backing strength matter.
Key Sanding Disc Details That Support Production
- The description states 3M 248D & 348D are designed for more aggressive applications, so this disc suits operations where rapid stock removal is preferred over fine finishing.
- Aluminum oxide on heavy duty X-weight cloth forms the abrasive face and backing, supporting higher pressure sanding passes where a lighter paper backing could wear faster.
- The disc uses a resin bond per 49689 3MITE RESINBND PSA wording, which holds the aluminum oxide grains firmly so they stay in place under industrial sanding loads.
- PSA no hole backing only means the adhesive-backed surface mounts to compatible PSA pads without vent holes, keeping the full 10 inch face in contact during sanding.
- The sanding disc is categorized as Abrasives|Abrasive Discs and Product Class Abrasive Discs, so it is intended specifically as a disc-type abrasive for sanding equipment that accepts this format.
PSA Sanding Disc Fit And Mounting Considerations
The web description identifies this product as a PSA no hole backing only disc, so it is designed to press onto flat PSA backup pads sized for a 10 inch disc without aligning any dust holes. The 10" dimension in the product name indicates the diameter, giving installers a clear match point when pairing the disc to machines or pad systems sized for that disc width. The 60 Grit notation signals a coarse abrasive grade, so it is suited to early sanding stages where material removal and scratch depth are acceptable in preparation for subsequent steps. The heavy duty X-weight cloth backing described for 3M 248D & 348D supports that coarse grit by stabilizing the disc when operators apply firm pressure on appropriate industrial sanding tools.
Using This 3M Abrasive Disc In Industrial Workflows
Where This 3M 248D Sanding Disc Fits Best
The product is identified as 3M 248D 10" PSA 60 Grit No Hole Aluminum Oxide Sanding Disc on X-weight, positioning it as a coarse sanding choice in abrasive disc workflows. The mention that 3M 248D & 348D are designed for more aggressive applications ties this disc to operations where material removal takes priority, such as leveling or initial shaping within industrial or occupational environments. Aluminum oxide on heavy duty X-weight cloth means the abrasive surface is bonded to a tough cloth backing, so the disc remains stable on large 10 inch PSA pads during extended sanding passes. The SATA description labeling this as Abrasives|Abrasive Discs and Product Class Abrasive Discs frames the product for use on sanders that accept 10 inch PSA discs in production settings where consistent abrasive performance is needed shift after shift.
Why The PSA And X-Weight Details Matter
The web description specifying PSA no hole backing only indicates the disc mounts via pressure-sensitive adhesive, which allows quick placement and removal on compatible PSA pads during job changeovers. 49689 3MITE RESINBND PSA wording signals a resin-bonded abrasive layer, giving the aluminum oxide grains a solid bond so they resist shedding when operators push for more aggressive cut rates. Heavy duty X-weight cloth backing described for 3M 248D & 348D adds tear resistance and stiffness, helping keep the 10" disc flat at the sanding interface so the 60 Grit surface contacts evenly across its face. The manufacturer part number 00051111496893 and 3M branding tie the disc to a defined industrial product line, which supports consistent sourcing when shops standardize on a specific 10 inch PSA abrasive for recurring aggressive sanding tasks.
Common 3M 248D Sanding Disc Questions Answered
What type of abrasive is on this 3M 248D disc?
The 3M 248D 10" PSA 60 Grit No Hole Aluminum Oxide Sanding Disc on X-weight uses aluminum oxide, providing a sharp cutting surface suited to more aggressive sanding applications.
How is the 3M 248D sanding disc mounted to the sander?
The web description notes PSA no hole backing only, so the disc attaches to a suitable 10 inch PSA backup pad using its pressure-sensitive adhesive surface.
What does the heavy duty X-weight cloth backing do?
The description states aluminum oxide on heavy duty X-weight cloth, so the backing supports higher pressure passes and helps the disc stay stable during aggressive sanding.
Is this disc suited to aggressive sanding stages?
The product description says 3M 248D & 348D are designed for more aggressive applications, so this 60 grit 10 inch disc targets coarse material removal tasks.
What does PSA no hole backing only mean for use?
PSA no hole backing only means the disc uses a full-face pressure-sensitive adhesive without dust holes, maximizing contact area on compatible flat PSA pads.
Who is this 3M sanding disc intended for?
The web description states it is for industrial/occupational use only, so it is intended and labeled for trained industrial and occupational customers in workplace environments.
Selecting This Disc For Aggressive PSA Sanding
The product name 3M 248D 10" PSA 60 Grit No Hole Aluminum Oxide Sanding Disc on X-weight combines coarse 60 grit aluminum oxide with a 10 inch PSA no hole format, so it fits PSA pad systems sized for that diameter in aggressive sanding roles. The description calling out aluminum oxide on heavy duty X-weight cloth and 3MITE RESINBND PSA shows this disc is built for demanding industrial or occupational applications where a firm resin bond and robust cloth backing support consistent cut. For shops standardizing on 10 inch PSA abrasive discs for more aggressive applications, this 3M 248D option offers a clearly defined specification and manufacturer part number 00051111496893 for repeat ordering.
