Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Keyhole Plate, Zinc is a Selby Furniture Hardware panel assembly fitting designed for assembling chairs, beds, cabinets, and similar casework, so one part number can serve multiple furniture builds in the same shop. The keyhole design works with #10 round head screws that engage through the slots and ride up the internal ramps under pressure, creating powerful wedge-action tightening that pulls mating parts together. That wedge action produces a rigid connection that resists play at joints where movement would show up as racking or squeaks. The plate is manufactured from .095 gauge cold rolled steel, giving the part a solid steel base that supports repeated loading at the keyhole ramps. A zinc plated finish adds a protective metallic coating over the steel, which helps the plate handle typical indoor woodworking environments while maintaining a clean hardware appearance on the workpiece.
The KEYHOLE BRACKET, SINGLE configuration (manufacturer part K2094U) functions as a top fastener within the fasteners and panel assembly fittings category, giving builders a compact way to pull components together from an accessible side. The two countersunk holes for #6 flat head screws secure the plate to a panel or frame, so the screw heads do not interfere with mating parts sliding into the keyholes. The keyholes guide #10 round head screws so heads enter easily, then travel up the ramps in the slot path, translating driving pressure into strong clamping between connected parts. By pairing flat head mounting screws at the plate with round head screws at the mating part, the fitting provides a straightforward method to align and tighten assemblies where direct through-bolting is not desirable.
This keyhole plate from Selby Furniture Hardware sits in the panel assembly fittings class, so it is intended for structural connections in chairs, beds, cabinets, and related furniture builds where panels or frames must pull together cleanly. As a top fastener in the fasteners category, it suits applications where one component carries the steel plate and the mating component carries #10 round head screws that engage the keyholes. In a chair or bed frame, the plate can serve at joints that must stay rigid while remaining accessible from one side for engagement with the screw heads. In cabinets and similar casework, the plate supports panel-to-panel or panel-to-frame connections where the keyhole slot offers both alignment guidance and a locked final position once the screws ride up the ramps.
The keyholes are shaped for #10 round head screws, and that geometry lets the screw head enter the wider portion of the slot and then move along the ramp under driving pressure, so the parts draw together without relying only on face friction. As the screws ride up the ramps, the wedge-action tightening clamps the joint, which helps maintain a rigid connection even where furniture sees repeated loads, such as in chairs and beds. The .095 gauge cold rolled steel body keeps the ramp surfaces stable, so the camming action of the screw heads does not distort the plate under normal service demands. Zinc plating on that steel adds a protective layer, keeping the interface between screw head and plate cleaner over time. The two countersunk holes for #6 flat head screws allow the plate to mount flush to the substrate, and that flush mounting supports accurate alignment so the #10 screws enter the keyholes smoothly at assembly.
The K2094U keyhole plate is a Selby Furniture Hardware panel assembly fitting in the fasteners, top fasteners category, so it functions as a structural connector in furniture assemblies.
This keyhole plate is used for assembling chairs, beds, cabinets, and similar furniture pieces, allowing panels and frames to be drawn together using the ramped keyhole connection.
The keyhole design uses #10 round head screws that enter the slot and ride up ramps under pressure, producing powerful wedge-action tightening that pulls connected parts into a rigid joint.
The keyhole plate fastens using two countersunk holes designed for #6 flat head screws, so the plate seats flush against the mounting surface for tight, unobstructed joints.
This keyhole plate is made from .095 gauge cold rolled steel with a zinc plated finish, providing a solid steel body with a protective metallic coating for indoor furniture use.
In cabinet assembly, this keyhole plate acts as a panel assembly fitting that works with #10 round head screws, drawing carcass parts together where a top fastener is appropriate.
The Selby Furniture Hardware Keyhole Plate, Zinc (manufacturer part K2094U) pairs a ramped keyhole slot with .095 gauge cold rolled steel construction and zinc plating, so it suits chairs, beds, cabinets, and other panel assemblies needing wedge-action tightening. Two countersunk holes for #6 flat head screws let the plate mount flush to a frame or panel, while #10 round head screws at the mating part engage the keyholes to draw components tightly together. For projects that call for a compact top fastener within the panel assembly fittings class, this keyhole plate provides a defined geometry and material combination suited to furniture and cabinet work.
Sold In: 1 Each