Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Friction Catch, Zinc from Amerock Corporation is a cabinet catch assembly that uses a catch and strike to hold doors closed by friction, which helps keep doors seated without relying on magnetic parts. The manufacturer part number BP34712G identifies this specific friction catch, so it can be specified consistently across cabinet runs and repeat projects. The product fits into the locks and latches category under catches, meaning it serves as the holding point for a cabinet door or similar panel. The catch and strike are sold together, so the friction pair is matched for proper engagement during installation. Screws are stated as supplied, which lets installers mount the catch and strike directly without sourcing separate fasteners on site. The zinc construction supports a cabinet hardware look that blends into typical shop and job-built casework.
This Amerock Corporation friction catch uses its 1-5/16 inch by 1-3/16 inch base size to mount within the interior cabinet space, giving installers a clear reference for laying out hole locations on rails or side panels. The 1/2 inch base height keeps the catch profile relatively low, which helps the door close over the hardware without binding. The strike size of 1-1/4 inch by 3/8 inch by 5/8 inch positions a narrow contact surface along the door or frame edge, helping the door engage the catch in a controlled path. Because the catch and strike are sold together, the installer works with matched parts that are designed to meet cleanly when the door closes. Screws stated as supplied allow direct mounting into wood components, tying the hardware firmly into cabinet structure.
The BP34712G friction catch belongs to the locks and latches category under catches, so it is suited to applications where a door or panel needs positive retention against a frame. The compact base size of 1-5/16 inch by 1-3/16 inch by 1/2 inch lets the catch fit inside typical cabinet boxes, face-frame rails, or casework partitions without crowding other hardware. The narrow strike size, 1-1/4 inch long by 3/8 inch wide by 5/8 inch high, fits well on slim door edges, which helps apply this hardware across smaller doors or light panels. As a friction catch, it provides holding force through the contact between catch and strike, which suits situations where a simple mechanical hold is preferred. The zinc description aligns with common cabinet hardware finishes, so the catch can sit inside a cabinet without drawing attention.
The clearly specified base size of the friction catch, 1-5/16 inch by 1-3/16 inch by 1/2 inch, gives installers fixed layout dimensions, which supports repeat hole spacing and consistent door engagement across multiple cabinets. The 1-1/4 inch by 3/8 inch by 5/8 inch strike size defines the working contact zone, helping layout technicians position the strike so the door closes into the same friction point every time. Because the catch and strike are sold together, the dimensional relationship between the two elements is factory defined, reducing guesswork about fit between components from different sources. The product name Friction Catch, Zinc and the SAP description FRICTION CATCH confirm its role as a friction-based holding device, giving designers and installers a clear functional label when documenting cabinet hardware schedules and replacement lists. Screws stated as supplied further support repeatable mounting by matching the hardware geometry from project to project.
The BP34712G Friction Catch, Zinc from Amerock Corporation is a cabinet catch classified under locks and latches, providing friction-based door or panel retention in cabinet and casework assemblies.
The base size of 1-5/16 inch long by 1-3/16 inch wide by 1/2 inch high keeps the friction catch compact, which helps installers position it on interior cabinet framing without interfering with door movement.
The strike size of 1-1/4 inch long by 3/8 inch wide by 5/8 inch high creates a slim contact area, supporting controlled friction engagement along narrow door or frame edges during closing.
This Amerock friction catch holds doors through friction between the catch and its matching strike, as confirmed by the product and SAP description, providing mechanical retention without a magnetic component.
The BP34712G part number uniquely identifies this Amerock friction catch, helping specifiers, shops, and installers match exact hardware across cabinet runs and during future replacements.
The stated supplied screws are sized for the catch and strike, allowing direct fastening into cabinet components so the friction hardware seats securely during installation.
The Friction Catch, Zinc with part number BP34712G gives cabinet builders a defined friction-based catch and strike pairing, anchored by precise base and strike dimensions. That combination lets drawings, cut lists, and shop workflows specify this Amerock Corporaton catch confidently wherever a compact cabinet friction catch is needed.
Sold In: 1 Each