Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EZ Flex Elbow Catch is a zinc plated catch from Amerock Corporation that provides a compact way to hold doors closed, which helps keep doors from drifting open in everyday use. The catch body measures 1-5/16 inches in length, 1 inch in width, and 1 inch in height so it fits into tight cabinet spaces while still giving a positive engagement point. The matching strike plate measures 1 inch in length, 7/16 inch in width, and 1/4 inch in height, creating a low-profile mating surface that works well on door frames or cabinet tops. The product is classified under locks and latches as a catch, which suits typical cabinet and casework door applications where a straightforward mechanical catch is preferred. The Amerock part number BP36752G identifies this specific EZ Flex Elbow Catch and supports consistent reordering for repeat projects.
The EZ Flex Elbow Catch uses a 1-5/16 inch long catch body, which gives installers a clear reference for positioning along the edge of a cabinet opening so the moving elbow lines up with the strike. The 1 inch catch width and 1 inch height provide a square footprint that can be laid out easily on a cabinet frame or shelf underside. On the mating side, the 1 inch long strike plate with its 7/16 inch width offers a narrow landing area that suits slim cabinet framing members. The 1/4 inch strike height keeps the contact point low, which is useful when aligning with the elbow portion of the catch for smooth latching without excessive projection into the opening.
The EZ Flex Elbow Catch from Amerock Corporation is a catch in the locks and latches category, which aligns well with cabinet, wardrobe, and general casework doors that need a mechanical hold-closed point. The compact catch size of 1-5/16 inches by 1 inch by 1 inch allows the hardware to be used where interior space is limited, such as shallow cabinets or tight overhead compartments, while still providing a defined engagement motion. The low-profile strike plate, at 1 inch by 7/16 inch by 1/4 inch, lets the installer position the mating surface on narrow rails or mullions without covering too much material, which is particularly useful in detailed woodworking layouts. Because the strike plate has an extra screw hole, it performs especially well on plastic laminate surfaces, where that additional fastening point helps resist rotation under repeated opening and closing cycles.
The zinc plated construction of the EZ Flex Elbow Catch creates a sturdy metal interface between catch and strike, which helps maintain consistent latching feel over time as doors are operated. The defined dimensions of both the catch and strike give clear layout references, so installers can position the components to achieve repeatable engagement from door to door on multi-opening runs. The extra screw hole in the strike plate is specifically identified as preventing spinning on plastic laminate, which directly improves long-term alignment on laminate cabinetry and helps avoid callbacks due to a rotated strike losing contact with the elbow. With a clear manufacturer part number, BP36752G, the same Amerock EZ Flex Elbow Catch can be specified across multiple jobs, supporting standardized detailing and predictable hardware performance wherever the same catch style is desired.
The Amerock EZ Flex Elbow Catch functions as a catch in the locks and latches class, providing a mechanical hold-closed point for cabinet and casework doors where a simple latch is required.
The catch size of 1-5/16 inches long, 1 inch wide, and 1 inch high gives a compact footprint that fits in tight cabinet spaces while providing enough area for accurate mounting and engagement.
The strike plate has an extra screw hole to prevent spinning on plastic laminate, which keeps the strike aligned on laminate cabinet surfaces for consistent latching.
The strike plate measures 1 inch in length, 7/16 inch in width, and 1/4 inch in height, providing a small, low-profile landing area on cabinet frames or rails.
The BP36752G elbow catch is manufactured by Amerock Corporation, which identifies the EZ Flex Elbow Catch within its locks and latches product range.
The zinc plated finish on the EZ Flex Elbow Catch provides a metal surface suited to regular door operation, supporting long-term function as doors are opened and closed.
The Amerock EZ Flex Elbow Catch, zinc plated and identified as BP36752G, combines a compact catch body with a low-profile strike sized for cabinet work, giving installers defined mounting dimensions for consistent layouts. The extra screw hole in the strike plate to prevent spinning on plastic laminate directly supports use on laminate cabinetry where alignment stability is important. For projects needing a small, metal elbow catch in the locks and latches category, these verified details help align this EZ Flex Elbow Catch with cabinet and casework door applications that benefit from a straightforward mechanical hold-closed point.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each |  AMCM3675-2G Mfr# CM36752G | Elbow Catches, 1-5/16" L, Bright Zinc - 500 Each |