4" Bed Rail Fastener, Yellow Zinc Plated, Set of 4 Male, 4 Female

4 Inch Bed Rail Fastener For Bed And Panel Joints

4 inch bed rail fastener describes this Selby Furniture Hardware panel assembly fitting that ties bed rails and other panels to posts using matched male and female parts, so you get repeatable alignment whenever the joint is assembled. The yellow zinc plated finish on this K744U fastener provides a treated steel surface that resists everyday handling and contact in bed, booth, partition, or shelf support applications, which helps the hardware stay serviceable in regular use. The set of 4 male and 4 female pieces creates four complete connections, so one set can secure multiple corners or panel joints in a project layout. As a panel assembly fitting in the Wurth Baer Supply fasteners lineup, this part is suited to woodworking builds where you want mechanical joints that can be taken apart and reassembled without cutting or gluing.

Key Bed Rail Fastener Details That Help On The Job

• The 4 inch length on this bed rail fastener gives a long bearing surface between the mating parts, which helps distribute load along the joint in beds, booths, or partitions where rails meet posts.
• The yellow zinc plated finish on the K744U post hanger creates a treated surface on the steel parts, which helps the hardware tolerate normal contact in furniture and partition use while maintaining a clean, uniform appearance.
• The set configuration of 4 male and 4 female pieces forms four matched connections, which lets you secure multiple bed corners or panel joints with consistent geometry across the project.
• The recommended fasteners listed as GF81005 (3/4 inch x 8 flathead) give a specific screw type and size that suits this fitting, which simplifies hardware selection when fastening the plates to wood components.
• The product category of panel assembly fittings positions this post hanger for beds, booths, removable partitions, and shelf brackets, which lets you standardize on one connection style across different panel-based assemblies.

Mounting And Rail Connection Details For Installation

This K744U bed rail fastener uses separate male and female steel components, so one part mounts to the post and the mating part mounts to the rail or panel, creating a positive joint when brought together. The 4 inch size provides extended contact between the mounted pieces, which helps align the rail along the post height and supports the load path in beds, seating booths, and similar assemblies. The recommended GF81005 3/4 inch x 8 flathead screws are sized for fastening these plates to typical wood members, so the plates can be drawn tight to the surface for solid contact. As panel assembly hardware, this design supports projects where components need to be secured firmly during use yet remain serviceable when disassembly or repositioning is required.

Using This Post Hanger In Beds, Booths, And Panels

Where This 4 Inch Post Hanger Works Best

This 4 inch bed rail fastener is described for beds, booths, removable partitions, and shelf brackets, so it suits woodworking projects that rely on framed posts and connected rails or panels. In a bed build, the four male and four female pieces can be laid out so each corner has a consistent connection, tying side rails or end rails to the headboard and footboard posts. In booth seating or banquette work, the same post hanger format can fasten seat or back rails to framing posts, allowing sections to be separated when needed. For removable partitions and shelf brackets, the panel assembly fitting role of this K744U part supports layouts where vertical posts and horizontal members must stay mechanically engaged during service but still be taken apart for rework or reconfiguration.

Why K744U Details Support Repeatable Panel Assembly

The K744U manufacturer part number identifies this specific 4 inch Selby Furniture Hardware post hanger, which matters when matching existing installations or repeating a detail across multiple jobs. Because the product sits in the panel assembly fittings class, it is oriented toward structured joints between posts, rails, and panels rather than incidental fixings, which supports more precise planning of joint locations. The 4 inch length and matched male/female geometry provide a consistent engagement depth, helping each bed rail or panel seat in the same location from corner to corner and reducing variation across assemblies. The yellow zinc plated finish supports handling during cutting, dry fitting, and installation without leaving raw steel at the joint, which is useful when components are installed, removed, and reinstalled during shop or site work. Using the recommended GF81005 3/4 inch x 8 flathead screws with this fastener gives a known interface between steel and wood, which helps keep the plates firmly seated so the mechanical joint carries load through the designed contact surfaces.

Common Bed Rail Fastener Questions For K744U

Selecting This Bed Rail Fastener For Your Next Build

This 4 inch bed rail fastener from Selby Furniture Hardware gives you a defined K744U panel assembly fitting for beds, booths, removable partitions, and shelf brackets, so one part number can cover several framing layouts. The yellow zinc plated finish and 4 male with 4 female pieces per set provide consistent joints where rails or panels meet posts, useful across multiple corners or sections. With the recommended GF81005 3/4 inch x 8 flathead screws specified for mounting, you can align your wood components around a known steel connection point. For woodworking projects supplied through Wurth Baer Supply where repeatable, serviceable joints are important, this post hanger offers a straightforward way to tie structural members together.