Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Flushmount interlocking panel hangers provide a low-profile way to fasten wall-panels, wall-hung cabinets, mirrors, bed headboards, and displays, so panels sit tight to the wall and look clean in finished installations. This Selby Furniture Hardware panel assembly fitting uses two interchangeable interlocking pieces that mate together, creating a stable mechanical connection that resists panel movement once engaged. The assembled thickness is only 1/8 inch, so the hardware stays virtually hidden while the panel sits close to its mounting surface, which helps achieve a neat, built-in appearance. Each hanger measures 1-1/2 inches by 1-3/4 inches, giving a compact footprint that fits on narrow rails or tight framing. The parts are made from .062 inch gauge steel and zinc plated, so the steel construction carries the load while the plating provides a protective finish for typical indoor woodworking environments.
The flushmount, single panel assembly fitting design keeps hardware thickness to 1/8 inch when assembled, so installers can plan reveals and clearances knowing the panel will sit close to the mounting surface. Each of the two interlocking steel pieces provides countersunk holes sized for #6 flat head screws, allowing the screw heads to sit level with the .062 inch gauge steel and avoid snagging during engagement. The 1-1/2 inch by 1-3/4 inch footprint helps these hangers fit on wall-panels, wall-hung cabinets, mirrors, bed headboards, and displays without crowding other fasteners, so layout can follow structural members while still using this specific KDFM100B flushmount fitting.
This interlocking panel assembly hardware is described for wall-panels, wall-hung cabinets, mirrors, bed headboards, and displays, so it suits applications where a panel needs to hang securely while remaining removable. The 1-1/2 inch by 1-3/4 inch size allows placement along rails or cleats on cabinets and headboards, giving a defined engagement point between the structure and the wall. With only 1/8 inch assembled thickness, these flushmount hangers position mirrors and displays close to the wall surface, which helps finished pieces read as part of the architecture instead of standing off on bulky brackets. The .062 inch gauge steel and zinc plated finish support this role by providing a robust metal connection that functions as part of a panel assembly fitting in typical woodworking and display environments.
The two interchangeable interlocking pieces are designed to mate perfectly, which supports repeatable alignment each time a wall-panel, cabinet, mirror, headboard, or display is lifted into place. Because both halves are interchangeable, installers can orient fittings consistently across multiple panels, simplifying layout for a series of displays or a run of wall-hung cabinets. The 1/8 inch assembled thickness defines a predictable standoff between surfaces, so trim, scribe panels, and reveals can be planned around a known dimension instead of variable hardware depth. The four countersunk holes for #6 flat head screws allow fasteners to sit flush in the .062 inch gauge steel, which keeps the sliding action between interlocking parts smooth and reduces catch points that could disrupt seating. Combined with the zinc plated finish, these details support clean engagement and disengagement over time while maintaining a tight, flush-mounted appearance for the assembled panel system.
The KDFM100B flushmount hanger is described for wall-panels, wall-hung cabinets, mirrors, bed headboards, and displays, so it serves as an interlocking panel assembly fitting in those applications.
The flushmount interlocking panel hanger has an assembled thickness of only 1/8 inch, which keeps mounted panels close to the wall for a low-profile installation.
Each flushmount hanger measures 1-1/2 inches by 1-3/4 inches, giving a compact footprint suitable for rails, cleats, and framing members on panels and cabinets.
These panel hangers are made of .062 inch gauge steel with a zinc plated finish, so the steel carries the load while the plating provides surface protection.
The two interchangeable interlocking pieces mate perfectly, creating a secure mechanical connection that lets panels be lifted into place and held flush against the mounting surface.
This flushmount hanger has four countersunk holes sized for #6 flat head screws, allowing the screw heads to sit level with the metal and avoid interfering with engagement.
The Interlocking Panel Assembly Hardware flushmount hangers in this KDFM100B configuration combine two interchangeable interlocking pieces, 1-1/2 inch by 1-3/4 inch size, and 1/8 inch assembled thickness to support clean, close-to-wall mounting of panels, cabinets, mirrors, headboards, and displays. The .062 inch gauge steel with zinc plated finish and countersunk holes for #6 flat head screws provide a defined way to create secure, repeatable panel assemblies. For projects where wall-mounted components need a tight, low-profile connection, these Selby Furniture Hardware panel assembly fittings align the mounting method with straightforward installation and a flush final appearance.
Sold In: 50 Set