Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 1175P is a nylon-roller center-mount slide that mounts beneath the center of the drawer box and rolls on a single steel rail with a zinc finish. This listing covers a 10-set pack of 22-5/8 inch slides, so one order outfits ten drawers.
A single center-mounted rail works well in furniture drawers, traditional casework, and anywhere a wooden center runner is being replaced or a pair of side-mounted slides would show. Dressers, nightstands, blanket chests, and lightly loaded shop or utility cabinets are the right territory. The 22-5/8 inch length suits deeper drawer boxes in this furniture range. Because this is a 3/4-extension slide, the back few inches of the drawer remain inside the cabinet at full open — that is the normal behavior for this class, not a limitation to work around. If rear access to every inch of the drawer is the requirement, a full-extension side-mount pair is the better fit.
The rail and slide components are steel with a zinc plated finish, which protects against corrosion in standard indoor environments. Nylon rollers keep operation quiet without the need for ball bearings, which makes this an economical choice where smooth travel at light loads is the goal and premium motion features are not needed. There is no self-close ramp, damper, or detent on this slide — the drawer rolls freely and stays wherever it is left. This is a standard-motion product.
Cabinet shops running multi-drawer furniture pieces find the 10-set pack practical: one SKU covers ten drawers, quantities are easy to track, and the per-unit cost fits the budget of production furniture work. Millwork and restoration shops replacing worn wooden center runners reach for this slide when they want a hardware replacement that installs without modifying the drawer box sides. Homeowners tackling a dresser rebuild or a shop-cabinet refresh also land here when they need a straightforward, low-profile solution that does not require 1/2 inch of clearance on each side.
This listing is a 10-set pack — ten individual center-mount slides, one per drawer, so one order covers ten drawers.
No. This is a mono-rail roller slide that mounts under the center of the drawer box, visible if you look underneath. A concealed undermount slide mounts beneath the box with front locking devices and requires a specifically notched drawer box. These are different products.
No. This is a standard-motion slide with no self-close ramp, soft-close damper, or hold-in detent. The drawer stays wherever you leave it.
A center-mount slide mounts to the bottom of the cabinet interior and the drawer bottom, so face-frame versus frameless construction matters less here than it does for side-mount slides. Confirm the installation depth suits your cabinet before ordering.
Each slide is rated at 50 lb. This is a per-slide rating on a single center rail, not a per-pair rating. Keep drawer contents well under that threshold for everyday loads.
Ten slides, one order, zero extra motion hardware to specify — the 1175P pack keeps furniture and casework projects moving without overcomplicating the hardware selection.
Sold In: 1 Set
