PVC edgebanding Mission White, in color 2019 Mission White, covers and protects raw panel edges so finished parts visually match the specified laminate. The 0.018 inch thick PVC construction wraps panel edges with a consistent color surface, which helps create a uniform look across doors, shelves, and casework. The 15/16 inch width works with common panel thicknesses, giving you enough coverage to trim flush without exposing the core. A 600 foot roll length supports longer runs and repeat work on the same color, which helps maintain color consistency from job to job. The edge banding matches Formica 933 Mission White in 58 matte finish, so the face and edge present as a coordinated surface on laminate projects that use that design. The Doellken Woodtape brand provides this PVC edge banding as part of their edge banding product class.
This PVC edgebanding Mission White, sized at 15/16 inch wide, fits edge treatments on panels where that width can be trimmed back to final size. The 0.018 inch thickness makes it suitable when a thinner edge profile is desired around laminate-faced components. Its classification as edge banding in the Edgebanding & Surfacing category means it is intended for use along exposed edges of panels rather than flat surfaces, guiding where it should be applied in a build. Because it is supplied as a 600 foot roll, it suits shop environments handling multiple components or repeated projects in Formica 933 Mission White, helping maintain a consistent edge appearance over time.
The PVC edgebanding Mission White is designated to match Formica 933 Mission White in a 58 matte finish, so it fits projects using that specific laminate design on visible faces. On cabinet doors, drawer fronts, or shelving built with that laminate, the 2019 Mission White color helps the edge present as part of the same visual field as the face. The 15/16 inch width lets you apply it to typical casework panels and then trim back, which suits shop-built cabinets, countertops with square edges, and commercial fixtures carrying that Mission White look. Because the product is categorized under Edgebanding & Surfacing as edge banding, it is intended for these panel-edge finishing roles rather than general trim tasks.
The combination of 0.018 inch thickness and 15/16 inch width on this PVC edgebanding Mission White gives you a predictable amount of material to trim, which supports repeatable edge quality across multiple parts. The thin profile lies close to the laminate face thickness, which helps the transition at the edge feel subtle while still masking the substrate. With 600 feet on a roll, you can run entire jobs of Formica 933 Mission White components from a single color lot, helping your edges match from the first cabinet part to the last. The clearly identified manufacturer part number 2019-1518-1 ties the color and size into a single reference, which simplifies reordering the same edge banding for future work that uses the same laminate design.
The PVC edgebanding Mission White is defined as edge banding in the Edgebanding & Surfacing category, so it is intended to finish exposed edges of laminate-faced panels and casework components.
The 15/16 inch width gives extra coverage beyond common panel thicknesses, allowing trimming back to a flush edge while keeping the panel core fully concealed along the edge.
The 0.018 inch thickness produces a relatively thin PVC edge that sits close to the laminate face thickness, helping create a smooth feel at the transition from face to edge.
This PVC edgebanding, in color 2019 Mission White, is matched to Formica 933 Mission White in the 58 matte finish, supporting coordinated face-and-edge laminate projects.
The 600 foot roll length allows many parts to be edged from the same roll, helping maintain color consistency across larger projects or repeat jobs in Mission White.
The manufacturer part number 2019-1518-1 identifies this exact 15/16 inch by 0.018 inch PVC edgebanding in color 2019 Mission White, simplifying sourcing and reorders.
The PVC edgebanding Mission White from Doellken Woodtape brings together a 0.018 inch thickness, 15/16 inch width, and 600 foot roll length in a color matched to Formica 933 Mission White 58 matte. For work that specifies that laminate on visible faces, this edge banding provides a coordinated edge treatment defined for panel edges in the Edgebanding & Surfacing category. When the job calls for this exact Mission White look across faces and edges, this 2019-1518-1 PVC edge banding offers the size and color alignment needed to carry the design across every exposed panel edge.