Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Touch Dimmer gives fingertip control of switching and dimming, so lighting can be controlled directly at the cabinet or fixture for quick adjustments during use. The touchcontrol wire connects to any metallic surface such as a cabinet hinge, metal screw, or metal knob, turning common hardware into a control point that is easy to reach once installed in a run of cabinetry. This design keeps the electronic dimmer module out of sight while still allowing direct access to control, which is helpful when working in finished spaces where visible controls are not wanted. By using the existing metal components as the touch point, installers gain flexibility in layout and can tailor the control location to how the cabinet or furniture piece will actually be used.
Touch Dimmer works by linking its touchcontrol wire to a metallic surface, so the chosen hinge, screw, or knob becomes the control point once wired. This lets installers route wiring through the cabinet or furniture piece while keeping the functional touch area exactly where the user will naturally reach. The dimmer provides four level linear dimming with off, 50%, 75%, and 100% output, which means light levels change in clear steps rather than jumps that are hard to repeat. Because the unit can dim up to 300 watts of lighting, it supports longer lighting runs from a single control location, which can simplify wiring layouts in casework, shelving, or display applications where several fixtures share the same circuit.
The ETD1 Touch Dimmer from Hera Lighting L.P. is suited to installations where discrete control directly at the cabinet or fixture is preferred, because the touchcontrol wire connects to a metallic surface like a cabinet hinge or metal knob that is already part of the design. In under-cabinet lighting or display case work, the ability to use a metal screw as the touch point lets the dimmer be integrated into existing hardware layouts without redesigning the front of the cabinet. Since the dimmer can handle up to 300 watts of lighting, it can support multiple lights along a countertop, shelving run, or casework bank while still giving a single, familiar touch location. This approach keeps the appearance of the cabinetry clean while retaining practical day-to-day control at the working edge of the installation.
The Touch Dimmer provides four level linear dimming with settings at off, 50%, 75%, and 100%, so users can move through consistent steps that are easy to recognize and reuse in regular operation. For installers, these fixed levels simplify commissioning because meeting a client request such as a mid-level brightness can be matched to the 50% or 75% step instead of guessing at a sliding scale. The linear nature of the dimming means the change between each level follows a steady progression, which helps maintain predictable lighting when matching several cabinets or displays in the same room. With the dimmer rated to control up to 300 watts of lighting, these repeatable levels can be applied across longer runs, supporting uniform appearance from one end of a bank of cabinets to the other.
Touch Dimmer provides fingertip control of switching and dimming for connected lighting, so users can turn lights on or off and select dimming levels directly at the chosen metal touch point.
Touch Dimmer is activated by the touchcontrol wire, which is connected to a metallic surface such as a cabinet hinge, metal screw, or metal knob, turning that part into the touch control.
The ETD1 Touch Dimmer offers four level linear dimming with off, 50%, 75%, and 100% output, giving clear, repeatable lighting steps for everyday use and setup.
The touch dimmer can dim up to 300 watts of lighting, allowing a single unit to control multiple fixtures along a cabinet, shelf, or display run on one circuit.
The ETD1 Touch Dimmer is manufactured by Hera Lighting L.P., placing it within Hera Lighting L.P.'s range of lighting control solutions for cabinet and display projects.
The touchcontrol wire connects to various metallic surfaces, so installers can choose hinges, knobs, or screws as touch points, aligning control with cabinet use and hardware placement.
The Touch Dimmer from Hera Lighting L.P. offers fingertip control of switching and dimming through a touchcontrol wire that connects to metallic surfaces already present on cabinets and fixtures. With four level linear dimming at off, 50%, 75%, and 100%, the dimmer supports predictable light levels that are straightforward to use in a kitchen, display, or casework installation. Its ability to dim up to 300 watts of lighting lets one ETD1 handle multiple fixtures along a run, supporting clean layouts with a single, discreet touch point. For projects where hidden controls and simple, direct operation are priorities, this touch dimmer provides a focused solution ready to integrate into metal hinges, screws, or knobs.
Sold In: 1 Each