
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 1284 series drawer slide gives a 22 inch 3/4 extension action, so a drawer or pull-out work surface travels far enough for access while still running on the slide for support. This left hand side mount cabinet member is part of the 1284-99 WH 550 configuration, which defines the 22 inch length and white finish used in many cabinet interiors. The slide is classified as a side mount drawer slide, so it fastens to the cabinet side for straightforward layout in casework or furniture. A white epoxy coated euro slide surface helps the member move smoothly against its mating parts in the system. The stay close design in the 1284 series holds the drawer in the closed position, which helps keep fronts aligned when cabinets are in regular use.
This Knape and Vogt 22 inch 3/4 extension euro slide uses a side mount configuration, so it fastens directly to the cabinet side panels during installation. Recommended fasteners are #6 x 5/8 inch Phillips pan head screws, which match the slide hole sizing and help seat the member flush without pulling through the steel. The 32 mm pattern on the slide ties into system-bored cabinet sides, which streamlines mounting when working with production casework or jigs built around 32 mm spacing. The defined 1/2 inch side clearance plus, 1/32 inch minus, 0 inch each side also gives a clear number for drawer box width, which supports repeatable fit across multiple cabinets.
This Knape and Vogt 1284-99 WH 550 component is the left hand cabinet member in the 1284 series, so it is intended to mount on the left interior wall of a cabinet. The 22 inch nominal length suits full-depth base cabinets and deeper furniture pieces where a longer drawer or pull-out needs support. With a height of 1-9/32 inch, the member fits into tight vertical spaces, allowing multiple slide levels in tall casework or stacked drawers. The side mount drawer slide classification aligns with typical frameless and framed cabinet constructions where slides sit flush to the case sides. A white epoxy coated euro slide finish blends with light-colored interiors and presents a smooth surface for the mating drawer member to travel against. The non self-closing operation works well on pull-out work surfaces that must remain fully extended while in use.
The 22 inch 3/4 extension motion lets the drawer clear most of the cabinet opening while a portion of the box remains engaged on the member, giving access while still supporting the load. The positive lock-out feature keeps a pull-out work surface or tray extended, which is useful during tasks that require both hands without worrying about drift. A positive stop in the mechanism defines the end of travel, protecting the slide and cabinet structure from over-extension impacts during daily use. The lift out disconnect feature lets the drawer member release from this left hand cabinet member, making drawer removal straightforward for adjustments, finishes, or hardware changes after installation. Because the slide follows a 32 mm pattern, production shops using line-boring methods can mount this member efficiently, keeping hole patterns consistent from cabinet to cabinet. The specified 1/2 inch side clearance plus, 1/32 inch minus, 0 inch gives a precise range for drawer construction, reducing trial-and-error and helping keep reveal lines uniform across a run of cabinets.
The Knape and Vogt 1284-99 WH 550 is a 22 inch 3/4 extension side mount drawer slide, so it supports standard-depth drawers or pull-outs from the cabinet side.
The 1/2 inch side clearance plus, 1/32 inch minus, 0 inch each side defines how much narrower the drawer box should be than the cabinet opening for smooth slide operation.
The positive lock-out feature holds a pull-out work surface in the open position, which keeps the surface stable during use and prevents it from sliding back unintentionally.
The lift out disconnect lets the drawer member separate from the cabinet member, which simplifies drawer removal for finishing, adjustment, or service.
The 32 mm pattern matches system-bored cabinet sides, so installers using line-boring layouts can mount the slide using existing hole rows without extra marking.
This Knape and Vogt 1284 series slide uses recommended #6 x 5/8 inch Phillips pan head screws, which match the mounting holes and seat the slide securely to the cabinet side.
This Knape and Vogt 1284 series left hand cabinet member ties together a 22 inch 3/4 extension stroke, 1/2 inch side clearance, and 32 mm pattern to support cabinet runs built around system boring and consistent drawer sizing. The white epoxy coated euro slide finish and non self-closing action suit interior casework where predictable, manual drawer movement is preferred. When a project calls for side mount drawer slides with a positive lock-out feature, positive stop, and lift out disconnect, this 1284-99 WH 550 component offers those functions in a defined, repeatable format.
Sold In: 50 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each | WW45340 Mfr# 3670000044961 1000 | Würth #6 x 5/8" Pan Head Hinge and Drawer Slide Installation Screw Phillips Drive - Type 17 Auger Point Coarse Thread Zinc, 3670000044961 1000 - 1000/Box |