Replacement Blade For ET-100 Edgebanding Trimmer Use

Replacement Blade for ET-100 Edgebanding Trimmer keeps the ET-100 trimmer working as designed, so edgebanding cuts stay consistent over multiple jobs. This Practical Products part matches the original function, which helps maintain familiar handling for installers and shop teams. The blade works in an edgebanding trimmer that simultaneously trims both edges of most soft edgebanding materials, so both banded sides are addressed in one pass and panels move off the bench faster. Duplicate blades on both sides are designed to flush or bevel trim panels from 1/2 inch to 1-1/2 inch thick, covering common cabinet, shelf, and component thicknesses in woodworking work. The blade supports the ET-100 process where the operator places the trimmer on the panel edge, squeezes the sides snugly together, then slides forward along the edge, so the cutting action follows a simple, repeatable motion for steady production.

Key Blade Details That Support Edgebanding Work

• The blade is specified as Replacement Blade for ET-100 Edgebanding Trimmer, so it is dedicated to that trimmer style and keeps the tool ready for ongoing edgebanding work.
• As part of an edgebanding tool that simultaneously trims both edges of most soft edgebanding materials, the blade supports two-sided trimming in one pass, which helps reduce handling time on each panel.
• Duplicate blades on both sides are described as able to flush or bevel trim, so the cutting edges support both straight and angled trimming approaches without changing tools.
• The trimming range from 1/2 inch to 1-1/2 inch thick panels means one blade setup serves a spread of standard cabinet and furniture panel thicknesses in the shop.
• The ET-100 process uses a place, squeeze, then slide-forward motion along the panel edge, and this blade is made to work within that motion so cuts stay aligned with how the tool is operated.

Edgebanding Trimmer Blade Fit And Operation Details

This Practical Products blade is identified as Replacement Blade for ET-100 Edgebanding Trimmer and Manufacturer Part # ET-100RP, tying it directly to the ET-100 trimmer workflow where the tool is placed on the panel edge, sides are squeezed snugly together, then the tool is slid forward along the edge. In that workflow, the blade participates in trimming both edges of most soft edgebanding materials at once, so tool setup is focused around that double-sided action. Because the system is described as able to flush or bevel trim panels from 1/2 inch to 1-1/2 inch thick, the blade is matched to those panel thicknesses and trim styles, which supports consistent results across that range in regular cabinet and woodworking production.

How This Replacement Blade Works In Daily Edgebanding

Where The ET-100RP Blade Is Used On Panels

The Replacement Blade for ET-100 Edgebanding Trimmer is used in an edgebanding tool from the Woodworking Tools and Equipment - Hand Tools - Edgebanding Tools category, so it is intended for edging work on wood-based panels in that trade environment. In use, the ET-100 trimmer is placed on the panel edge, then the operator squeezes the sides snugly together and slides the tool forward, meaning the blade works along the banded edge rather than across the face of the panel. As the tool simultaneously trims both edges of most soft edgebanding materials, this blade is engaged on both the top and bottom edges of the band at the same time, so both sides are trimmed in one continuous motion along the length of the workpiece. With the system able to handle panels from 1/2 inch to 1-1/2 inch thick, this blade sees use on components like carcass sides, shelves, and other banded parts built within that thickness range.

Why The Blade Design Supports Repeatable Trimming

Duplicate blades on both sides of the ET-100 trimmer are specified to flush or bevel trim panels from 1/2 inch to 1-1/2 inch thick, so once this Replacement Blade for ET-100 Edgebanding Trimmer is fitted, the same motion can be used to produce straight or angled cuts without swapping trimmers. That behavior supports repeatable trimming because the operator can keep the familiar place, squeeze, then slide-forward technique while adjusting how the trimmer is presented to the edge to achieve flush or bevel results. Since the trimmer simultaneously trims both edges of most soft edgebanding materials, both cutting edges of this Practical Products blade work together, which helps keep the top and bottom band edges consistent along the full run of the panel. Using the ET-100 trimmer with this ET-100RP blade within the 1/2 inch to 1-1/2 inch panel range gives a defined operating window, so shops can run their frequent cabinet and furniture panel sizes while relying on the same trimming approach across multiple components.

Common Questions About The ET-100RP Trimmer Blade

Choose This Blade For Consistent ET-100 Trimming

The Replacement Blade for ET-100 Edgebanding Trimmer from Practical Products ties directly to the ET-100 workflow of placing the trimmer on the panel, squeezing the sides snugly, then sliding forward to simultaneously trim both edges of most soft edgebanding materials. With duplicate blades on both sides designed to flush or bevel trim panels from 1/2 inch to 1-1/2 inch thick, this blade keeps that trimming range available for regular cabinet and woodworking jobs. Selecting this ET-100RP blade through Wurth Baer Supply supports continued use of the ET-100 edgebanding trimmer across runs of banded panels that match its described operating range.