
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
469 single track zinc finish from Knape and Vogt is a builders hardware sheave and track component that provides a defined running surface for sheaves, so door or panel movement stays guided along a fixed line. The track is identified as a double sheave track, which means it is shaped to carry sheaves in a controlled path, keeping rolling loads constrained to the hardware instead of rubbing against wood or casework. The 144 inch single track length is suited to long, continuous straight runs, which helps installers span wide openings or multiple panels without splicing shorter pieces. The zinc finish on the track forms a uniform metallic surface that resists handling marks and light wear during normal interior use, so the rolling interface between sheaves and track remains smooth. Being part of the Knape and Vogt builders hardware line ties this track to a recognized sheaves and tracks family, which helps keep hardware selections consistent across a project.
The 144 inch single track length lets installers fasten one continuous piece along a support, so sheaves roll across a uniform section without transitions that could cause bumps. The track relies on 1/2 inch x #5 screws, which sets a clear fastener standard and helps align pilot drilling, bit selection, and driver setup around a single screw size during installation. Because this hardware sits within the Knape and Vogt sheaves and tracks category, it is intended to serve as the running member for sheave-based assemblies, so positioning and fastening directly affect how smoothly panels or doors travel. The zinc finish on the double sheave track supports clean screw seating against a metal surface, which helps each mounting point clamp firmly and hold alignment over the full 144 inch run.
This Knape and Vogt 469 ZC 144 part is classified under builders hardware sheaves and tracks, so it functions as the guiding element for rolling sheaves in sliding assemblies. The double sheave track description indicates that the internal shape of the metal forms a defined raceway, which keeps sheaves tracking straight along the length instead of wandering laterally. At 144 inches, the single track can serve wide cabinet spans, passage openings, or long panel systems where a continuous metal path is preferred over multiple shorter segments. The zinc finish on the track presents a consistent metallic contact surface, which supports predictable rolling behavior of sheaves each time the door or panel cycles along the run. By using the specified 1/2 inch x #5 screws through the track, installers tie the running surface directly to framing or cabinet structures, allowing the sheave load to transfer into solid support members.
The 469 single track zinc finish construction provides a straight, manufactured profile that helps keep sheaves aligned from end to end, which is important when multiple doors or panels rely on the same track to move without binding. Because the hardware length is defined as 144 inches, layout work can revolve around this single segment, letting installers position hangers, stops, and mating components relative to a known straight reference. The double sheave track designation tells the installer that this component is intended to work with sheaves rather than sliding shoes, so the rolling interface between wheel and metal becomes the primary factor in how smoothly the system operates. Zinc finish on the track contributes to a stable rolling surface, which supports repeatable movement during everyday opening and closing. The specified use of 1/2 inch x #5 screws ties all mounting points to a consistent fastener size, which simplifies tooling on site and helps maintain even clamping force along the full track length.
The 469 single track zinc finish is a builders hardware sheave and track component that serves as the running surface for sheaves, guiding sliding doors or panels along a defined metal path.
The 469 ZC 144 double sheave track is listed as a 144 inch single track, giving installers a full-length section for long straight runs without joints interrupting sheave travel.
The Knape and Vogt 469 single track has a zinc finish, providing a uniform metallic contact surface that supports smooth sheave rolling during normal interior hardware use.
The 469 single track zinc finish uses 1/2 inch x #5 screws, so the fastening interface is defined and installers can set drilling and driving steps around that screw size.
The double sheave track design creates a guided raceway for sheaves, keeping wheels aligned on metal so sliding doors or panels roll predictably along the entire 144 inch length.
The 469 ZC 144 track belongs to the builders hardware sheaves and tracks product class, meaning it is intended to work as part of a sheave-based sliding hardware assembly.
The 469 single track zinc finish from Knape and Vogt provides a 144 inch double sheave track with a defined metal raceway, so sheaves can roll on a stable surface across wide openings. The zinc finish and 1/2 inch x #5 screw interface give installers a clear hardware specification for mounting this builders hardware component into sheave-based assemblies. For projects that call for a long, straight, sheave-ready track in a zinc finish, this 469 ZC 144 part aligns with that role.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV402 Mfr# 402 STL | 402 Enclosed Ball Bearing Sheave, Steel Finish | ||||
Sold in: 1 Each | KV429 Mfr# 429 STL | 429 Steel Round Groove Sheave | ||||
Sold in: 1 Each | KV580 Mfr# 580 STL | Enclosed Steel Sheaves 2" Length Light Doors |