Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt pull out valet rod describes a compact extension hang rod that slides out to support temporary hanging in a closet or similar storage run. The 0.43 inch diameter rod provides a defined hanging point, which helps keep garments aligned instead of piling up on a shelf edge. The Anochrome finish identifies a neutral metal look that visually fits in most closet hardware layouts, supporting a consistent appearance across multiple storage components. As a valet rod in the Shelf, Closet and Garage Organization category, it adds a specific stop for staging items, which simplifies sorting and preparing outfits. The manufacturer part number 753 ANO ties this rod to Knape and Vogt documentation, which helps installers match it with other components in the same hardware family. As an extension hang rod, it moves use out from the cabinet or panel front, which gives direct access while working.
The inset mount design means the body sits within a prepared bore, and the stated 2-1/16 inch bore length defines how deep that bore must be to house the mount. When planning layout, the overall length of 10-5/16 inch gives the installer the full span of the assembly from the fixed end to the tip, which supports accurate positioning relative to cabinet sides or partitions. The extension range from 5/8 inch to 8-1/4 inch sets how far the rod can travel outward during use, which matters when aligning it with door swings or adjacent storage features. The specified total clearance of 9.695 inch identifies the space envelope needed for full extension, helping avoid interference with nearby walls, shelves, or face frames.
This Knape and Vogt Anochrome pull out valet rod is part of the Valet Rods class within Shelf, Closet and Garage Organization, which locates it naturally in closet and similar storage projects. The inset mount style and 2-1/16 inch bore length focus its use on panels or structural members where a drilled pocket can be created, allowing the body to recess into the material for a low-profile look. The 0.43 inch diameter rod offers a defined point for hanging garments, garment bags, or similar items within that storage zone, which streamlines short-term staging tasks. With an overall length of 10-5/16 inch and total clearance needed of 9.695 inch, it fits applications where that space is available along the run, supporting predictable integration into a bank of cabinets or closet panels. The Anochrome finish allows it to visually align with other Anochrome closet components when those are specified for the project.
The extension range from 5/8 inch to 8-1/4 inch allows the valet rod to start nearly flush and then move outward to a working position, so the hanging point can project into open space while the hardware body stays within the panel. This adjustable extension helps installations close to doors or adjacent units because the installer can reference the stated total clearance of 9.695 inch to judge whether the rod can extend fully without contacting other surfaces. The 10-5/16 inch overall length provides a stable lever arm for the 0.43 inch diameter rod, helping distribute hanging loads along the recessed mount in typical closet use. The 2-1/16 inch bore length contributes to this by giving enough embedded depth for the inset section, which supports secure seating of the rod body inside the panel material. Together, these defined dimensions support repeatable mounting locations and consistent operation across multiple closet openings.
The Knape and Vogt 753 ANO valet rod is an extension hang rod with a 0.43 inch diameter Anochrome-finished rod that pulls out for hanging within closet and storage organization projects.
The valet rod extends from 5/8 inch to 8-1/4 inch, allowing the hanging point to project from the mounting panel while staying within the total clearance of 9.695 inch.
The extension hang rod has an overall length of 10-5/16 inch and requires total clearance of 9.695 inch so the rod can move through its full extension range without obstruction.
The 0.43 inch rod diameter defines the hanging surface size, giving garments a consistent bearing area typical for valet rods in closet organization layouts.
This Knape and Vogt extension hang rod is categorized as a valet rod in Shelf, Closet and Garage Organization, so it fits projects needing a pull out hanging point.
The Knape and Vogt pull out valet rod 753 ANO provides an inset mount extension hang rod with a 0.43 inch diameter Anochrome-finished rod, a 2-1/16 inch bore length, and an 8-1/4 inch maximum extension, all within a 10-5/16 inch overall length. These defined dimensions, along with the total clearance requirement of 9.695 inch, give installers concrete numbers for locating the rod in closet or storage panels. For projects where a pull out hanging point is needed within those space constraints, this valet rod configuration offers a clearly specified option ready to integrate into the overall organization plan.
Sold In: 1 Each
