Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
500 Series concealed undermount drawer slides from Houck Industries mount to the bottom of the drawer, creating a clear drawer side appearance that keeps drawer sides unobstructed, which helps when a clean interior look is required on visible cabinetry. This center bottom mount drawer slide is part of the 500 Series GO-EZ system, giving installers a consistent platform across related applications where the same hardware family is preferred. The undermount concealed system supports a 22 inch drawer, aligning the slide length with common cabinet depths so drawer travel matches typical residential and commercial casework. A four point suspension supports the drawer on multiple contact points, helping distribute load and motion across the slide. This design works with the concealed mount to keep movement controlled at the centerline of the drawer.
This center bottom mount drawer slide is engineered as a concealed undermount system, so it attaches beneath the drawer box rather than the sides, allowing drawer side panels to remain full height for box strength and storage layout. The 22 inch length is specified for a 22 inch drawer, which helps align cabinet depth planning, slide position, and drawer construction dimensions around a known running length. As part of the 500 Series GO-EZ range, the slide provides a consistent undermount geometry, simplifying layout when multiple drawers in a project use the same system. The concealed mounting keeps all running components underneath the drawer, which is useful where the drawer interior or side profile will be visible after installation.
This 500 Series GO-EZ undermount slide fits cabinets where a center bottom mount drawer slide is preferred, because the concealed system mounts directly to the bottom of the drawer to maintain maximum internal width. Applications that call for clear drawer side appearance benefit from this design, since roller bearing components and brackets sit below the box rather than along the sides. The 22 inch drawer specification allows the installer to match this Houck Industries slide to drawers built around that depth, aligning the slide stroke with carcass depth. In projects using multiple 500 Series components, this slide can keep hardware selection consistent across a run of cabinets.
The axle on this roller bearing undermount slide exceeds a 100 lb capacity, so the axle components are sized to carry more than the slide weight rating of 50 lb, adding margin in the primary load path. Dual dimple stop design provides a safety stop and lock open access, which holds the drawer at an open position so it does not roll back while contents are accessed. A four point suspension structure supports the drawer at multiple points, which stabilizes movement and helps limit racking through the slide travel. Wheel life testing exceeding 100,000 repetitions with 30 pounds evenly distributed shows the rollers have been cycled under defined load, supporting long-term performance expectations in frequently used drawers. Brackets designed with a staple pattern allow the rear mounting bracket to be fastened with staples following that pattern, which can speed attachment in shop or production environments while keeping bracket position consistent.
The 500 Series GO-EZ is a concealed undermount, center bottom mount drawer slide that mounts to the bottom of the drawer, supporting a clear drawer side appearance in finished cabinetry.
This Houck Industries slide is specified for a 22 inch drawer, so it is intended for drawers built around that depth when planning cabinet casework and slide layout.
This undermount drawer slide has a weight rating of 50 lb, while the axle exceeds 100 lb capacity, providing extra strength in the axle beyond the overall slide rating.
The dual dimple stop provides a safety stop and lock open access, so the drawer can stay open at a set position during use without rolling closed unintentionally.
This Houck Industries slide is made from cold rolled steel with a satin bright color, providing a consistent steel substrate and a bright appearance in the cabinet.
The wheel system on this drawer slide has been life tested to exceed 100,000 repetitions with 30 pounds evenly distributed, indicating durability under repeated open-close cycles.
The 500 Series concealed undermount drawer slides from Houck Industries provide a center bottom mount design for 22 inch drawers, combining a clear drawer side appearance with a 50 lb weight rating and an axle exceeding 100 lb capacity. Dual dimple safety stop and lock open access support controlled drawer positions in daily use. Four point suspension, cold rolled steel construction, and wheel life testing beyond 100,000 cycles under 30 pounds evenly distributed position this slide as a practical option when specifying undermount hardware. For projects calling for satin bright finish hardware and a consistent 500 Series GO-EZ platform, this drawer slide aligns well with professional cabinet and drawer construction requirements.
Sold In: 1 Set
