
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CompX National disc tumbler deadbolt lock secures cabinet drawers and doors using a deadbolt mechanism that works in woodworking and similar applications where keyed control is needed. The lock uses a 15/16 inch cylinder length, which positions the plug correctly through typical cabinet material so the key engages smoothly during daily use. It requires a 7/8 inch diameter mounting hole, so installers can drill a consistent bore and expect a snug fit that helps keep the cylinder stable. The lock is surface mounted, allowing it to be added to existing drawers and doors in shops or built-ins without altering case construction. An antique brass finish gives the lock a specific visual match to antique brass hardware lines, which helps maintain a uniform appearance across doors, drawers, and surrounding fittings.
This CompX National deadbolt lock is surface mounted on doors or drawers, so it fastens to the exterior face while the cylinder passes through a prepared opening. The 7/8 inch diameter mounting hole requirement sets the drill bit size, which supports accurate hole placement and repeatable installs across multiple cabinets. With a 15/16 inch cylinder length, the lock body projects through the panel to reach the front, so the key engages the tumbler stack consistently on cabinet thicknesses suited to that length. The disc tumbler construction provides the locking function within this cylinder, which keeps the operation concentrated at the drilled opening for straightforward alignment.
This CompX National disc tumbler deadbolt lock is described for drawers and doors, so it applies to both sliding drawer fronts and hinged cabinet doors in woodworking installations. Because it is surface mounted, the lock works on cabinet faces where the installer can access the interior to receive the deadbolt, which is common in casework and built-in storage. The antique brass finish aligns it with antique brass cabinet hardware programs, so it can be used on visible doors and drawers in kitchens, offices, or furniture-style pieces that rely on that finish group. The 7/8 inch mounting hole requirement also means it fits layouts where that bore size can be drilled cleanly through the face panel. The disc tumbler mechanism uses the key to drive a deadbolt action suitable for restricting access to drawers and doors in these settings.
The 15/16 inch cylinder length defines how far the lock projects through the cabinet material, which affects how the key seats and turns in everyday use. A cylinder sized for this depth helps maintain smooth rotation when locking and unlocking drawers or doors that match that thickness range. The key is removable in both locked and unlocked positions, so users can withdraw the key after securing the cabinet or leave it out while the cabinet remains open but keyed for later locking. The lock is keyed alike to C415A code, which means multiple locks with that code operate from the same key, reducing key counts in installations where many drawers or doors must be controlled together. It will key together with all other disc tumbler locks using the D8785 key blank, allowing a disc tumbler system based on that blank to operate this lock alongside other matching locks in the same environment.
The C8704-C415A-4G unit is a CompX National disc tumbler deadbolt door lock, so it uses a disc tumbler mechanism to drive a deadbolt for securing drawers and doors.
This deadbolt lock is described for drawers and doors, so it suits cabinet drawers and hinged doors in woodworking, casework, or similar storage installations.
This lock requires a 7/8 inch diameter mounting hole, giving installers a specific drill size for positioning the cylinder accurately through the cabinet face.
The cylinder length is 15/16 inch, which sets how far the lock body extends through the door or drawer front and influences key engagement depth.
The lock allows the key to be removable in both locked and unlocked positions, so users can remove the key after securing or opening the cabinet.
This deadbolt lock is keyed alike on code C415A and will key together with other disc tumbler locks using the D8785 key blank, supporting shared keying.
The CompX National disc tumbler deadbolt lock with 15/16 inch cylinder and 7/8 inch mounting hole specification offers a defined fit for drawers and doors that accept those dimensions. Surface mounting supports retrofit cabinet work, while the antique brass finish aligns with matching hardware programs. C415A keyed alike capability and D8785 key blank use allow this lock to participate in broader disc tumbler keying systems. For projects that call for a surface mounted deadbolt lock on drawers or doors using these measurements and finish, this model provides a clearly defined option.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | NLC8704KA346-14A Mfr# C8704-C346A-14A | CompX National Disc Tumbler Deadbolt Lock, 15/16" Cylinder with 7/8" Mounting Hole, C346A Keyed Alike, Bright Nickel | ||||
Sold in: 1 Each | NLC8704KA415-14A Mfr# C8704-C415A-14A | CompX National Disc Tumbler Deadbolt Lock, 15/16" Cylinder with 7/8" Mounting Hole, C415A Keyed Alike, Bright Nickel |