Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
corner braces plastic glue boxes translucent describes Hughes Supply plastic corner braces designed for fastening inside cabinet corners during construction. The braces are made of high impact, specially compounded plastic material, so they support cabinet corner reinforcement where a plastic part is preferred over metal. Because the material is specifically compounded for impact resistance, it tolerates typical handling during cabinet assembly. The braces are 3-5/8 inches long and 3/4 inch deep, so they sit along the cabinet corner without taking excessive space, leaving room for shelf hardware or other internal fittings. The translucent material keeps the brace visually subdued inside light-colored casework, which matters when cabinets are built for exposed interiors. These braces are part of the Corner Braces and Glue Blocks product class, so they serve both as mechanical fasteners and as glue blocks in case construction.
The Hughes Supply corner brace is designed so the plastic material can be stapled through without shattering, letting a builder drive staples directly through the brace into cabinet members in one step. That behavior shortens the fastening sequence on line-built carcasses because the installer positions the brace and fixes it immediately. The brace will also accept glue, so a bead can be applied where it contacts adjacent panels, creating both mechanical and adhesive restraint at the corner. Off-center screw holes provide easier screw gun access into the corner of the cabinet, so the driver aligns more directly with the screw, which supports cleaner entry and reduces slipping against cabinet walls while driving.
These Hughes Supply corner braces fall under the Corner Braces and Glue Blocks product class, so they are intended for use at cabinet corners where case parts meet. With a length of 3-5/8 inches and a depth of 3/4 inch, each brace spans a modest section of the joint without covering a large area, which helps when space is limited near toe kicks or rail intersections. The translucent plastic finish keeps the brace visually discreet against many interior finishes, so it suits cabinets where interiors remain exposed during regular use. Tabs extending out from the main body add extra bearing against cabinet members, so the brace contacts more surface area at the corner, which is useful when supporting joints between cabinet bottoms, tops, or fixed shelves and the cabinet sides. The staple-through design and glue acceptance combine fastening roles, which aligns with secondary needs for a plastic glue block for cabinets.
The PGH443E corner brace model uses off-center screw holes to provide easier screw gun access into the corner of the cabinet, so installers can approach at a better angle and repeat consistent screw placement across multiple cases. That hole positioning reduces interference between the driver and adjacent cabinet walls, which helps keep screws started accurately and reduces wear on bits. Being made of high impact, specially compounded plastic material, the brace resists shattering when staples are driven through, so a production crew can use the same fastening method across many cabinets without changing tools. Because the brace will also accept glue, a shop can standardize on one part that works with both fasteners and adhesive, which simplifies inventory and repeat setups. The 3-5/8 inch length and 3/4 inch depth remain consistent from brace to brace, so layout distances remain predictable when spacing braces along cabinet corners during repetitive builds.
The Hughes Supply corner braces are made of high impact, specially compounded plastic material, which supports impact resistance during stapling and handling in cabinet construction environments.
The corner brace can be stapled through without shattering, so installers drive staples directly through the plastic into cabinet parts, which streamlines fastening steps on assembly lines.
The PGH443E corner braces have off center screw holes to provide easier screw gun access into the cabinet corner, which helps maintain straighter screw entry and smoother driving.
Each translucent corner brace is 3-5/8 inches long and 3/4 inch deep, so it reinforces the cabinet corner while occupying limited interior space.
The corner brace has tabs extending out, creating extra bearing surface against cabinet sides or bottoms, which supports joint stability at intersecting panels.
The corner brace will also accept glue, so adhesive can be applied along contact faces, combining mechanical fastening with bonded support at cabinet corners.
The Hughes Supply PGH443E corner brace is a translucent plastic brace within the Corner Braces and Glue Blocks product class, designed for use in cabinet corners. With high impact, specially compounded plastic material that can be stapled through and will also accept glue, it supports both mechanical and adhesive methods in one part. The 3-5/8 inch length, 3/4 inch depth, extended tabs, and off-center screw holes all work together to reinforce cabinet corners while maintaining access for tools. For shops building or assembling cabinets that need plastic corner support inside the case, these corner braces plastic glue boxes translucent provide a focused option.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1200 Each |  PGH443E Mfr# H-0443-NAT-ETH | Corner Braces Plastic Glue Boxes, Translucent - 1000 Each |