Hinge Accessories Insert Door Stop, Plastic 100 Each

Hinge Accessories Insert Door Stop For Inset Doors

Hinge accessories insert door stop gives inset cabinet doors a solid stop point when they are hung on European concealed hinges. European hinges over-close, and on an inset door there is no cabinet side for the door to rest against, so the swing can pass the 90 degree position. This clear plastic stop mounts on the cabinet floor, where it intercepts the back of the door and halts the swing at a 90 degree flat position with the cabinet face. By controlling that final stopping point, the door stop supports consistent alignment across a run of inset fronts on a cabinet fitted with European concealed hinges. The piece is part of the hinge screws and accessories class, so it is designed to work in the same zone of the cabinet build where hinges set movement and position. Using a dedicated stop in that area keeps the motion defined by hardware instead of by wood contact.

Key Door Stop Details For Cabinet Projects

• The door stop is described as used primarily as a door stop for inset doors hung with European concealed hinges, which targets a common problem in cabinets where the door otherwise swings past flat and disrupts the intended face alignment.
• European hinges over-close relative to the cabinet opening, and this stop adds a defined contact point so the hinge motion ends at a controlled 90 degree position, helping repetitive installations behave the same way.
• The stop is mounted on the cabinet floor, placing the contact where the back of the inset door travels, so the stop works with the hinge swing path rather than relying on edge contact with cabinet sides.
• Specifications state the piece is 7/16 inch wide by 1/2 inch high, giving a compact profile that still presents enough height to intercept the door edge reliably without occupying excessive cabinet interior space.
• The material is clear plastic, which keeps the visible impact low inside the cabinet while still delivering a defined physical stop point that supports the flat face line of the installation.

Mounting This Door Stop For Flat Door Closure

This clear plastic door stop works by being mounted on the cabinet floor in line with the swing of an inset door hung on European concealed hinges. When the door opens or closes, the back edge eventually contacts the stop instead of continuing past the 90 degree point, so the hardware, not the frame, defines where the motion ends. With the door stopped at a 90 degree flat position, the front of the door aligns with the cabinet face as intended for an inset layout. The compact 7/16 inch width and 1/2 inch height support positioning the stop at a precise point along the floor of the cabinet so it engages the moving door edge predictably.

Using The Clear PGH950CL Stop In Cabinet Work

Where This Plastic Insert Door Stop Is Applied

The PGH950CL clear door stop is used primarily in inset door applications using European concealed hinges, where the hidden hinge geometry allows the door to swing beyond a true 90 degree alignment. In that layout, there is no face frame or side panel acting as a natural stop for the back of the door once it passes the plane of the cabinet. By placing this stop on the cabinet floor under the swing path, the installer creates a physical limit that stops the motion when the door hits a 90 degree flat position with the cabinet face. The hinge accessories classification reflects that it works in conjunction with the hinge hardware to shape door travel, acting as a controlled stop point rather than relying on incidental contact.

Why The 90 Degree Flat Position Matters In Use

European hinges over-close by design, so an inset door without a defined stop can travel past the desired face plane, which affects the visual line and can change how the door interacts with surrounding elements. Using this clear plastic stop to halt the swing at 90 degrees gives a repeatable endpoint that keeps the door front flush with the cabinet face in everyday use. The specified 7/16 inch width and 1/2 inch height allow the stop to be positioned accurately so it meets the back of the door at the right moment in the hinge arc, balancing compact size with reliable contact. Because the material is clear plastic, the stop remains visually unobtrusive while still creating a positive stop point that helps preserve alignment across a full bank of inset doors operating on European concealed hinges.

Common Questions About This Inset Door Stop

Select This Door Stop For Inset Hinge Control

The doorstop clear PGH950CL from Hughes Supply serves cabinet projects where inset doors run on European concealed hinges and need a defined stopping point. Its 7/16 inch width, 1/2 inch height, and clear plastic body work together to stop the door at a 90 degree flat position with the cabinet face. Adding this hinge accessory to the cabinet floor gives each door a consistent end to its swing, supporting clean lines across a bank of inset fronts. For projects built around hinge screws and accessories that control motion, this door stop ties the hinge travel to a precise, repeatable closing point.