Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Conquest polished brass knob gives cabinets and furniture a bright brass touch while keeping a compact 1-3/8 inch diameter. That size keeps the pull point comfortable without crowding narrow rails or smaller drawer fronts. The knob is part of the Conquest collection, so its profile and detailing match other Conquest pieces for consistent hardware runs across a project. Material is zinc die cast, which creates a stable, rigid knob body that handles repeated use on frequently opened doors and drawers. The polished brass finish lays over that zinc die cast base, providing the bright brass look many shops need to match existing brass hinges or other decorative hardware. Brand is Belwith Keeler under the Hickory Hardware name, giving a clearly identified source when matching existing jobs or recording part numbers in shop standards lists.
This Belwith Keeler knob is sized around a 1-3/8 inch diameter face, so it pairs well with standard single-hole cabinet drilling where a single center point is marked. The knob uses an 8-32 machine screw, which aligns with common cabinet knob drilling practices that rely on a straight through-bore for the screw shank. Screw length is 1 inch, giving enough thread to pass through typical cabinet door or drawer front thicknesses found in many woodworking projects. The 1 inch projection from the mounting surface defines how far the gripping point stands off the wood, helping installers anticipate clearance around adjacent doors. With a 5/8 inch base diameter, the contact area at the cabinet surface remains modest, supporting installation on both wider rails and slimmer frames without covering too much profile detail around the mounting point.
The Conquest polished brass knob with its 1-3/8 inch diameter suits cabinet doors and drawer fronts that need a single pull point in kitchens, baths, or built-in casework where a bright brass look is desired. Its 1 inch projection keeps the hand away from the cabinet face during use, which is useful on drawers that see frequent loading and unloading. The 5/8 inch base diameter lets this knob sit cleanly on face frame cabinets or full-overlay doors, supporting layouts where several knobs line up closely on smaller drawer banks. Because the knob belongs to the Conquest collection, it can be used where multiple pieces from the same line are specified, simplifying visible hardware coordination across an installation. The polished brass finish supports projects that follow brass hinge or trim choices, helping maintain visual continuity on exposed cabinet fronts.
The 1-3/8 inch, or 35 mm, diameter gives installers a repeatable reference when planning hardware layouts because centerlines can be set to balance the knob size with door and drawer proportions. The 1 inch projection is consistent from piece to piece, which helps create straight visual lines when knobs are placed across a bank of doors or drawers at the same setback. The zinc die cast material keeps knob dimensions stable from part to part, supporting predictable alignment when multiple units are mounted on a large run of cabinetry. Using the 8-32 threaded interface ties directly into standard cabinet knob drilling and tapping practices, which streamlines hardware changes or future replacements using the same thread size. The polished brass finish across the knob body provides a uniform surface, so when many knobs are installed on a job the overall appearance stays visually consistent along the entire elevation.
The P14848-3 knob has a 1-3/8 inch, or 35 mm, diameter face, a 1 inch projection, and a 5/8 inch base diameter, giving clear size references for cabinet layout work.
The knob is zinc die cast, providing a solid, uniform body that supports consistent feel and alignment when tightened against cabinet doors or drawer fronts.
The knob uses a polished brass finish, creating a bright brass appearance that coordinates with brass hinges or other polished brass cabinet hardware on the same project.
The knob is designed for an 8-32 machine screw with a 1 inch length, aligning with common cabinet knob drilling through standard door and drawer front thicknesses.
The knob has a 1 inch projection, setting the gripping point away from the cabinet face enough for comfortable pulling on doors and drawers.
The P14848-3 knob is a Belwith Keeler product from the Hickory Hardware Conquest collection, helping match other Conquest pieces on coordinated installations.
The Conquest polished brass knob from Belwith Keeler combines a 1-3/8 inch diameter, 1 inch projection, and zinc die cast construction to deliver a defined grip point and consistent size across cabinets. The polished brass finish aligns with brass-focused designs, while the 8-32 x 1 inch screw interface matches standard cabinet drilling. For projects needing repeatable layouts and a bright brass look tied to the Conquest collection, this knob fits straightforward cabinet door and drawer applications.