
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pullout gives cabinet waste storage a simple, space-saving format for kitchen use. This bottom mount trash pullout from Rev-A-Shelf Corporation is part of the RV Series and comes fully assembled for faster installation. It uses epoxy coated ball bearing slides with full extension, so the bins move out for easier access. The unit includes two 35 quart waste bins in white and a white carriage. For buyers comparing a kitchen cabinet trash pullout, this model focuses on practical installation with four screws rather than extra accessories. White waste bins keep the look consistent inside the cabinet, and replacement bins, door mount kits, and lids are available separately when your project calls for them.
Key specs to confirm: This full extension waste pullout is a bottom mount model with an overall named width of 14-7/32 inches and a product reference of 14.375 in the source data. It includes two 35 quart white bins and uses epoxy coated ball bearing slides. Before ordering, confirm your cabinet opening, interior depth, and clear floor area for a bottom mounted frame and full slide travel. If you plan to add a cabinet door mount kit or lids, note that those items are sold separately. Load rating, compliance details, and any safety data are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf bottom mount waste pullout, one white carriage, and two 35 quart white waste bins. Lids are not stated as included for this specific package and should be confirmed if needed.
What to verify before ordering: Confirm cabinet opening width, usable interior depth, mounting surface condition, and whether you need a door mount kit, replacement bins, or lids. Verify that your cabinet layout allows full extension travel and check manufacturer installation guidance and local building requirements where applicable.
A double trash pullout is a common fit for kitchens where open floor space is limited and waste storage needs to stay inside the cabinet. This Rev-A-Shelf waste pullout is built for that kind of use. The two 35 quart waste bins give separate capacity in one pullout frame, which can help organize general waste and another stream such as recyclables, depending on your setup. Because the unit is bottom mounted, installers can focus on securing the frame to the cabinet floor rather than building around side-mounted hardware.
For remodel work, the fully assembled format can save time. Rev-A-Shelf states that the RV Series installs with four screws, which is useful when you need a direct replacement for an older kitchen cabinet trash pullout or when you want to add concealed waste storage without a long parts list. The full extension waste pullout design matters in daily use because it brings the bins farther out of the cabinet, making it easier to lift liners, clean around the bins, and reach the rear container.
Buyers searching RSRV18PB2S or comparing a white bin model may also want to plan for future maintenance. Replacement bins are sold separately, and door mount kits are also sold separately, so you can confirm whether the base pullout alone matches your project scope. If you need lids, the product information says lids can be purchased separately and that lid inclusion varies by bin offering, so that detail should be checked before purchase. If your project includes a face frame, hinges, or nearby plumbing lines, confirm those clearances because exact cabinet fit details beyond the listed product width are not provided here.
The keyword wire may appear in related searches, but this product data identifies a bottom mount waste pullout with ball bearing slides and does not describe a wire frame construction. Buyers who specifically need a wire trash pullout should confirm frame style from technical documentation before ordering.
When buyers compare waste pullout styles, the main differences usually come down to mounting method, access, assembly level, and included bin configuration. This Rev-A-Shelf trash pullout uses a bottom mount format, which can be a practical choice when side space is limited or when you want a straightforward mounting point on the cabinet floor. The included full extension slide design supports better access than shorter-travel pullouts, which is useful in a double-bin layout.
Another point of comparison is installation effort. Some pullouts require more assembly or more hardware planning before they are ready to mount. This Rev-A-Shelf waste pullout is described as fully assembled and installs with four screws, giving installers a clear starting point. That makes it easier to estimate labor and confirm whether the cabinet can accept the unit without added fabrication.
Included components also affect value at the project level. This model includes two white 35 quart waste bins and a white carriage, but replacement bins, door mount kits, and lids are separate items. That matters because some buyers want a simple base unit, while others need a fully dressed setup tied to a cabinet door. The product data supports the base pullout details, but not every accessory combination, so the safest approach is to match the pullout to your cabinet dimensions and then add only the parts your installation requires.
Rev-A-Shelf trash pullout is a bottom mount waste pullout with full extension slides and two 35 quart bins.
This Rev-A-Shelf waste pullout comes fully assembled, which can reduce installation time.
This double trash pullout includes two white 35 quart waste bins.
This bottom mount trash pullout requires you to confirm cabinet opening width, interior depth, and floor clearance for full slide travel.
This Rev-A-Shelf waste pullout does not list a door mount kit as included. Door mount kits are sold separately.
This waste pullout does not confirm lid inclusion for this package. Lids can be purchased separately.
This full extension waste pullout uses epoxy coated ball bearing slide designs.
Rev-A-Shelf states that replacement bins are sold separately for this trash pullout series.
This product listing does not provide load or compliance data. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf waste pullout is a practical choice when you need a fully assembled bottom mount unit with two 35 quart white bins and full extension slides. Before you buy, confirm cabinet opening width, interior depth, and whether your project also needs lids or a door mount kit, since those accessories are separate. Checking fit first helps you match the included white carriage and bins to the cabinet layout and avoid delays during installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSRVDM Mfr# RV DM KIT | Rev-A-Shelf RV Series White Door Mount Kit, 1-1/2"W x 8"H x 2-1/8"D - RV DM KIT | ||||
Sold in: 1 Each | RSDPRV-DM-KIT Mfr# RV DM KIT | Rev-A-Shelf RV Series White Door Mount Kit, 1-1/2"W x 8"H x 2-1/8"D - RV DM KIT |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSRV15PB2S Mfr# RV-15PB-2 S | Rev-A-Shelf RV 11-25/32" White Bottom Mount Waste Pullout with 2-27 Quart White Bins Standard, RV-15PB-2 S |