Fastcap white PVC cover cap is a peel and stick piece designed to cover unused or misplaced holes bored in doors for European hinges, so the door face presents a cleaner, more finished look on completed jobs. The cover cap measures 1-9/16 inch wide by 2-1/2 inch long, giving enough coverage to span the full 35mm hinge bore and surrounding area for a consistent surface appearance. Material is 0.020 inch thick PVC, so the cap sits low on the surface while still masking the bore visually during normal use. The white color matches typical light-colored doors where European hinges are used, which helps the repair blend into the door rather than drawing attention. Sold in full box quantities only, this format supports repeat use across multiple doors on the same project where several hinge locations were changed or corrected.
This peel and stick cover cap design simplifies handling on door work where European hinge bores are no longer needed, because the installer can position the Fastcap piece directly over the hole and press it down rather than performing a fill operation. The 1-9/16 inch width and 2-1/2 inch length give a defined footprint for placement over the 35mm hinge bore area, so the cap naturally aligns with the existing bore zone on the door. With material at 0.020 inch thick PVC, the cover sits close to the surface plane, which matters when the door will be viewed at an angle and the repair should remain understated. The white color coordinates with light door finishes often paired with European hinges, which supports a consistent look when multiple unused hinge locations are covered along a door edge or face.
This Fastcap 2-1/2 inch by 1-9/16 inch white PVC peel and stick cover cap is designed for doors that have unused or misplaced holes bored for European hinges, so it fits directly over those hinge bore locations. The dimensions let the cap span the typical 35mm hinge hole and surrounding material, which is useful on cabinet or similar doors where hinge layout changed after boring. The white PVC face suits projects using light-colored doors with European hinges, so covered bores align visually with the rest of the surface instead of standing out. In practice, the cap performs as a surface-applied solution on the door where a European hinge was planned but ultimately not used.
The cover cap being specifically designed to cover unused or misplaced holes bored in doors for European hinges means its size and shape directly address that bore geometry, which helps reduce visible evidence of earlier hinge locations. The 1-9/16 inch width and 2-1/2 inch length work together to create an elongated patch, so the repaired area looks deliberate rather than like a small plug over a 35mm circle. Material at 0.020 inch thick PVC keeps the cap from standing too proud of the door surface, which matters when doors are installed in rows and need a consistent visual plane. The peel and stick format turns the cap into a quick application part on site, helping installers handle several unused bores across multiple doors without separate finishing steps. White PVC supports an appearance that blends with common light door finishes used around European hinges, so the final door presentation aligns with the rest of the run even after layout changes.
This Fastcap cover cap is designed to cover unused or misplaced holes bored in doors for European hinges, so it targets the typical hinge bore layout used for that hardware.
The 1-9/16 inch width and 2-1/2 inch length span the 35mm hinge bore area and nearby surface, so the cap masks both the hole and minor edge damage around it.
The 0.020 inch thick PVC keeps the cover cap relatively low on the door surface, which helps the repaired area sit closer to the surrounding material profile in everyday viewing.
The peel and stick design lets the Fastcap cover cap be applied directly over the hinge bore, supporting a quick surface fix without separate filler or finishing steps.
The white PVC color aligns with light-colored doors often used with European hinges, so the covered bore tends to blend visually into the door face under normal lighting.
The Fastcap FC.MB.H2.5.WH part number identifies this specific 2-1/2 by 1-9/16 inch white PVC cover cap, helping match the same style when repeat coverage is needed.
The Fastcap 2-1/2 inch by 1-9/16 inch white PVC peel and stick cover cap gives a purpose-built way to address unused or misplaced holes bored in doors for European hinges, using a 0.020 inch thick PVC piece sized to span the hinge bore area. For door runs where European hinge locations changed after boring, this Fastcap FC.MB.H2.5.WH cover cap provides a consistent, surface-applied solution that supports a cleaner finished appearance across the project.
Sold In: 1 Box