45 degree chamfer router bit describes this Amana Tool 2 inch by 2-5/8 inch chamfer router bit designed for solid surface work. Its 45 degree angle profile cuts consistent chamfers, helping fabricators put a clean, repeatable edge on countertops and other solid surface parts. The bit uses a 2 inch cutting diameter to cover more edge in each pass, supporting efficient material removal on wider workpieces. A 3/4 inch cutting height balances edge coverage with control, so installers can break an edge without cutting too deep into the face. The 1/2 inch shank provides a solid grip in routers built for that size, supporting stable running at the speeds typically used in solid surface fabrication. A 2-5/8 inch overall length keeps the cutting portion close to the collet, which supports reduced leverage and steadier control during edge work.
This Amana Tool 45 degree chamfer router bit uses a 1/2 inch shank, so it seats into router collets designed for that diameter, supporting a tight mechanical grip for edge work. The 2-5/8 inch overall length positions the cutting head close to the router, which supports stable handling during passes along solid surface edges. With a 2 inch diameter and 3/4 inch cutting height, the bit engages enough material to form a substantial chamfer while still allowing installers to work within the control range of common routers. The Ultra-Glide ball bearing guide assembly steers along the work edge, so the router can be moved with the bearing contacting the solid surface or template, guiding the 45 degree profile where it needs to cut.
This 2 inch diameter, 45 degree chamfer router bit is built for solid surface applications where a consistent bevel is needed along exposed edges. The 3/4 inch cutting height allows the profile to be set so only part of the edge is cut, which is useful when easing countertops or similar parts without over-reducing the edge thickness. The Ultra-Glide ball bearing guide assembly follows the edge or a pattern, so fabricators can run the router along straight or curved sections while the bearing keeps the 45 degree cutting edge in line with the design. The 2-flute configuration supports a balance between feed rate and finish, so in many solid surface edge scenarios the bit can move steadily while still delivering a smooth chamfer that is ready for the next step in the workflow.
The 1/2 inch shank on this chamfer bit gives routers with that collet size a solid mounting interface, which supports reduced chatter as the 2 inch diameter edge engages the material. The 2-5/8 inch overall length keeps the cutting mass closer to the collet, so when the router moves along a solid surface edge the leverage on the bit is moderated, supporting consistent tracking along the 45 degree path. The 45 degree angle is fixed by the bit geometry, so every pass that runs with the Ultra-Glide ball bearing guide assembly against the work will produce the same chamfer angle, aiding visual consistency across multiple panels or sections. The 3/4 inch cutting height defines the maximum depth of the bevel, giving installers a clear limit when setting how much of the edge to remove in each setup. Together, these details allow solid surface fabricators and installers to repeat the same chamfer profile across a job without constant adjustment for angle or edge shape.
This Amana Tool chamfer router bit is described for solid surface use, so it serves tasks such as putting 45 degree chamfers on solid surface countertop edges and similar fabricated components.
The 57220 chamfer router bit has a 45 degree angle, which sets a consistent bevel profile whenever the bit is run along an edge guided by the ball bearing.
This chamfer bit has a 2 inch diameter and 3/4 inch cutting height, so it can form a substantial 45 degree bevel while limiting how far into the edge it cuts.
This Amana Tool chamfer bit uses a 1/2 inch shank, so it fits router models that accept 1/2 inch shank tooling for solid surface and edge-forming operations.
The Ultra-Glide ball bearing guide assembly rides against the work or template edge, helping the 45 degree cutting profile follow the same path and produce uniform chamfers.
The 2-flute layout on this chamfer router bit presents two cutting edges to the solid surface, which balances feed rate with a controlled finish suitable for edge profiling.
The Amana Tool 2 inch by 2-5/8 inch chamfer router bit with Ultra-Glide ball bearing guide brings a 45 degree profile, 3/4 inch cutting height, and 1/2 inch shank together for solid surface edge work. These dimensions support stable mounting, guided routing, and repeatable chamfers across countertops and similar projects. For installers and fabricators needing a defined 45 degree edge on solid surface components, this 57220 chamfer router bit aligns its geometry with everyday routing tasks.