Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #6 x 3/4-inch pan head hinge and drawer slide installation screw is built for one job: attaching European cup hinges and drawer slide hardware to cabinet panels. At 3/4 inch, it threads fully into 3/4-inch stock without breaking through the back face, making it the right fit for the most common cabinet material thickness in shop and field work.
European cup hinges and side-mount drawer slides are designed around a specific fastener profile: a non-countersunk head that bears flat against the mounting plate, a gauge that fits the pre-bored holes in the hardware, and a length calibrated to the panel thickness. The 3/4-inch length threads into the full depth of standard 3/4-inch cabinet side panels and hinge mounting rails without risk of break-through. That matters in frameless cabinet boxes where the visible interior surface is the back of the same panel the screw enters. A screw that exits the far face leaves a mark. This one does not.
The pan head distributes clamping force evenly across the hinge or slide mounting flange, pulling the hardware flat against the panel face and keeping it there. The coarse thread bites quickly in the wood-composite panels that make up most cabinet boxes, and the sharp point self-starts in the pilot holes that come pre-drilled in standard hinge plates and slide brackets.
The zinc finish is matched to interior cabinet use. It handles the low-humidity, climate-controlled environment of a finished cabinet and resists the light surface oxidation that plain steel picks up over time in a shop environment. This is not a screw for damp locations or exterior exposure, but for standard kitchen, bath, and furniture cabinetry it is the appropriate specification. The #6 gauge aligns with the pre-bored holes found in the vast majority of European hinge mounting plates and drawer slide hardware, so the head seats properly rather than standing proud or pulling through.
Cabinet shops running production will recognize this as a line-item staple. With 2,400 screws per box, a single order covers a substantial run of cabinet boxes without restocking interruptions. For installers, the Phillips drive means no special bits are required on a job where the box of hardware may include half a dozen different fastener types. The 3/4-inch length suits standard face-frame and frameless cabinet panels in plywood, particleboard, and MDF. It also works when mounting European hinges to 3/4-inch solid wood face-frame stiles, where the screw engages the full thickness without protruding.
The screw needs to engage the full thickness of the panel to hold firmly without exiting the opposite face. In 3/4-inch cabinet panels, the 3/4-inch length threads through the mounting plate and into the panel without breaking through the visible interior surface.
Yes. The 3/4-inch length and #6 gauge suit both frameless cabinet side panels and 3/4-inch solid wood face-frame stiles where hinges are surface-mounted.
Hinge mounting plates and drawer slide brackets have flat-bearing flanges, not countersunk holes. A pan head sits flat against that surface and clamps the hardware evenly. A countersunk head would not seat correctly against a flat mounting flange.
Yes. The coarse thread is designed to grip wood-composite materials including particleboard and MDF, which make up the majority of production cabinet boxes.
This screw is sized and profiled for European cup hinge and side-mount drawer slide hardware. Undermount slides often have different mounting plate geometry and may specify a different gauge or head style. Check the slide manufacturer's installation guide before using this screw on undermount hardware.
When the hinge order and the drawer slide order both arrive on the same pallet, this screw installs both. A single fastener specification for two of the most common hardware types in cabinet production means one bin, one bit, and one reorder part number across the whole job.
Sold In: 100 Each