SurfPrep Profoam 6 inch sanding disc is a 6 inch diameter aluminum oxide abrasive disc designed for sanding applications where a flexible foam-backed disc is needed. The disc uses SurfPrep Profoam construction in a 5mm thickness, so it can conform to profiles while still providing controlled sanding on flatter surfaces. The medium plus grade is suitable for tasks needing a cut between fine finishing and more aggressive stock refinement. The disc is specified at 150-180 grit, which targets sanding steps where surface refinement and scratch blending are important. A hook and loop backing lets the disc be mounted and removed from compatible hook and loop backup pads quickly, supporting repeated disc changes over a job. A multi-hole pattern is part of the disc layout, allowing alignment with matching multi-hole backing pads for dust extraction during sanding passes.
This SurfPrep Profoam disc uses a hook and loop attachment interface, so it mounts on hook and loop sanding pads sized for 6 inch discs. The foam-backed 5mm construction lets the abrasive face compress slightly under pressure, helping the disc maintain contact over small variations without cutting sharply into high spots. The medium plus grade works with the 150-180 grit abrasive to maintain a predictable cut rate, which supports consistent scratch patterns from disc to disc. The multi-hole layout in the disc face is designed to align with multi-hole backing pads used with extraction, providing openings for air movement across the contact area during sanding.
This SurfPrep Profoam 6 inch x 5mm disc is part of SurfPrep abrasive discs used in woodworking and similar sanding tasks where a foam-backed disc is preferred. The 6 inch size aligns with many common random orbit and similar sanders built around 6 inch hook and loop pads, placing this disc in typical shop sanding workflows. The 5mm foam body supports work on edges, contours, and slight profiles, so the abrasive can reach into transitions that a rigid disc may skip. The 150-180 grit rating positions this disc in sanding sequences around intermediate to pre-finish stages, where surfaces have already been shaped and need refinement. The medium plus designation works with this grit range to handle remaining minor unevenness while preparing surfaces for subsequent finishing steps.
The aluminum oxide abrasive on this SurfPrep disc provides the cutting surface that performs the actual sanding at the specified 150-180 grit, helping generate a consistent scratch pattern suitable for intermediate and refining passes. The Profoam 5mm thickness spreads pressure across the contact area, which can reduce the tendency to dig into edges and assists in blending surfaces more evenly. The hook and loop backing helps maintain stable attachment during operation while still allowing frequent disc changes, supporting consistent tool feel from one disc to the next. The multi-hole disc pattern is laid out for use with multi-hole pads, so when paired with an extraction-capable pad the openings support dust removal paths that help maintain sanding efficiency and surface visibility throughout the operation.
This SurfPrep Profoam disc has a 6 inch diameter, which suits sanders and backing pads designed around 6 inch hook and loop abrasive discs.
The disc is specified at 150-180 grit, so it addresses sanding steps focused on refining surfaces and reducing visible scratches before later finishing stages.
The SurfPrep Profoam disc uses a 5mm thick foam body, giving the abrasive flexibility to follow mild contours and edges during sanding.
This disc has a hook and loop backing, so it attaches to compatible hook and loop pads, supporting quick disc changes between sanding steps.
The multi-hole layout in the disc face aligns with multi-hole backing pads to provide air and dust paths that support dust extraction during sanding.
The manufacturer part number SP6DPF5MPVC-25 identifies this specific SurfPrep Profoam 6 inch x 5mm medium plus multi-hole aluminum oxide hook and loop disc.
This SurfPrep Profoam 6 inch x 5mm medium plus disc from Wurth Baer Supply provides a foam-backed aluminum oxide abrasive in the 150-180 grit range for sanding tasks using hook and loop, multi-hole systems. The combination of 6 inch diameter, Profoam 5mm thickness, hook and loop backing, and multi-hole design positions this disc for sanding workflows that call for flexibility, surface refinement, and dust extraction support. Selecting this SurfPrep aluminum oxide sanding disc aligns your sanding stages with a disc specified for intermediate to refining passes on appropriate surfaces.
Sold In: 25 Each