800LCA Schlage Less Deadbolt Drawers Lock Body with Short Bolt, Satin Chrome, Cylinder Length 1-1/8"

800LCA Schlage Drawers Lock Body For Secure Deadbolt Use

800LCA Schlage drawers lock body from Olympus Lock, Inc. is a deadbolt lock body for drawer applications that use Schlage compatible cylinders, so you get a targeted solution when you already standardize on that key system. The lock body is designed to accept Schlage compatible key-in-knob cylinders, allowing you to match existing Schlage keyways across cabinets or casework without changing cylinder families. A short bolt configuration suits drawer installations where throw length and clearances are tighter, helping the bolt engage without interfering with contents behind the front. The satin chrome 26D finish presents a neutral, professional appearance on visible drawer fronts, aligning with other satin chrome hardware in the same run. As a lock body only, it focuses on the core locking function and works as the central component of a Grade 1-level drawer deadbolt setup.

Key Lock Body Details That Support Drawer Work

• The lock body is part of the deadbolt locks product class, so the bolt action provides positive engagement in drawer applications where a simple latch is not appropriate.
• A short bolt layout suits drawers where you need secure bolt throw within a limited space, helping the deadbolt engage the strike without over-travel behind the drawer face.
• The satin chrome 26D designation means the visible lock body finish coordinates with other satin chrome hardware, which matters on projects where front-of-house appearance needs to remain consistent.
• Placement in the locks and latches category highlights its role as the primary locking point on a drawer, so it can be specified as the dedicated security component rather than a general catch.
• Identification by manufacturer part number 800LCA-SB-26D lets installers and buyers match the exact Olympus Lock component across drawings, schedules, and service replacements.

Rekeyable Installation And Set Screw Cylinder Release

The 800LCA Schlage drawers lock body uses a set screw cylinder release mechanism to control the cylinder interface, so cylinders can be rekeyed by swapping Schlage compatible key-in-knob cylinders without changing the entire lock body. This mechanism allows the cylinder to be released through the set screw connection point, keeping the rest of the assembly mounted while the keying is updated. In practice, that means the installer can align the lock body in the drawer once, then manage key changes at the cylinder level instead of pulling the hardware from the panel. For cabinet shops and facility teams working with keyed systems, this approach supports ongoing rekeying around a fixed Grade 1-level lock body.

Where This Olympus 800LCA Lock Body Fits Best

Drawer Installations Using Schlage Compatible Cylinders

The 800LCA Schlage drawers lock body is designed for drawer installations that rely on Schlage compatible key-in-knob cylinders, so it slots directly into projects where Schlage patterns are already part of the key system. Its role in the deadbolt locks product class means it is aimed at installations needing bolt-driven security rather than a spring latch, which aligns with drawer fronts that must stay positively locked until keyed. The lock body accepts Schlage compatible cylinders from other manufacturers, letting you coordinate with existing hardware families while still using the Olympus Lock component in the cabinet construction. When a facility or millwork package is built around Schlage keyways, this lock body lets the drawer section follow the same cylinder family for straightforward key control.

Why Grade 1 Performance And Zinc Die Cast Matter

The 800LCA-SB-26D lock body has passed ANSI/BHMA A156.11 Grade 1 performance requirements, so its deadbolt function is tested to a high performance level that supports demanding use in drawer environments. For installers working in commercial or high-use settings, this Grade 1 performance rating provides a quantified indication of how the lock body responds to typical service demands on drawers. The housing is zinc die cast, giving the lock body a formed metal structure that supports the deadbolt mechanism inside a rigid shell during repeated locking cycles. That combination of a zinc die cast body with a Grade 1 performance-tested design allows the lock body to serve as a long-term component in drawer assemblies that are opened and locked regularly over the life of the installation.

Common Questions About The 800LCA Schlage Drawers Lock Body

Select The 800LCA Lock Body For Schlage Drawer Systems

The 800LCA Schlage drawers lock body with short bolt and satin chrome finish gives installers a deadbolt locks-class component specifically built to work with Schlage compatible key-in-knob cylinders. Its ANSI/BHMA A156.11 Grade 1 performance rating and zinc die cast construction position it as a durable core for drawer locking in commercial or serious residential projects. By using the set screw cylinder release mechanism, you can handle future cylinder changes or keying updates while the lock body remains aligned in the drawer front. Pair this Olympus 800LCA-SB-26D lock body with your chosen Schlage compatible cylinder family to keep drawer security consistent across your project.