Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 5 inch sanding discs are aluminum oxide, paper-backed discs built for wood sanding, so each disc targets cabinet-grade and furniture-grade surfaces. The 100 grit rating levels surfaces between coarse stock removal and finer finishing, which supports a smooth progression through your sanding sequence. A hook and loop backing lets you attach and remove discs quickly from compatible pads, reducing downtime between grit changes during multi-step jobs. The 5 inch diameter with a 9-hole pattern matches sanders designed for this layout, which promotes dust extraction performance when paired with proper equipment. Rubin 2 is designed to shed wood fibers as you sand, which reduces clogging on natural and engineered woods so the abrasive continues to cut. That fiber-shedding behavior keeps the surface of the disc open, which supports the stated 30 percent faster removal rate and longer disc life in normal woodworking use.
The hook and loop backing on these Festool Rubin 2 5 inch sanding discs grips matching sander pads securely, so discs stay flat under load for even contact across the work surface. That backing also lets you pull and reposition discs without tools, supporting fast grit changes as you move from 80 through 220 in the recommended progression. The 5 inch, 9-hole format works with sanders built for this pattern, channeling air and dust through the holes so extraction systems can pull debris away from the work area. With aluminum oxide on a paper backing, each disc flexes appropriately under a powered pad, which helps conform to flat panels and gentle curves while maintaining the chosen 100 grit scratch profile across the cut.
These Festool Rubin 2 5 inch 100 grit hook and loop 9-hole aluminum oxide discs are specified for use on hardwoods like oak or maple, so they fit common cabinet frames, doors, and solid edging. The same abrasive is specified for soft woods like pine or fir, making it suitable for millwork, trim, and interior carcass parts that use construction-grade lumber. Rubin 2 discs are also described for tropical woods such as ebony or teak, so they address dense, oily species often used in accent pieces or high-end details. In addition, they are specified for wood-based products, covering materials like plywood, MDF, or other engineered panels found in casework and shop-built components. Across these materials, the closed coated aluminum oxide layer delivers a strong cut, while the Rubin 2 fiber-shedding behavior keeps the grain face open for continued sanding efficiency.
The Rubin 2 formulation centers on quickly shedding wood fibers during sanding, which keeps the abrasive surface from loading with dust and resin, supporting a consistent cut over repeated passes. That self-cleaning effect is tied to the claimed 30 percent faster removal rate, so each 100 grit disc advances you toward a flat, uniform surface with fewer strokes. Because every sheet is specified to last 30 percent longer, you can run more workpieces before disc changeover, maintaining the same scratch pattern across a full job run. Rubin 2 is described as designed for rapid grit progression from 80 to 220, so using this 100 grit step fits neatly between coarser leveling and finer pre-finish sanding stages. With aluminum oxide as the abrasive and synthetic resin as the bond, the disc handles the friction and heat of powered sanding on hardwoods, softwoods, tropical woods, and wood-based products, supporting repeatable workflow from rough shaping to finish-ready surfaces.
Festool Rubin 2 5 inch sanding discs are designed for hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and wood-based products, covering typical cabinet and furniture materials.
Festool Rubin 2 sanding discs are stated to deliver a 30 percent faster removal rate, so each disc removes wood more quickly, helping move from leveling to finish sanding in fewer passes.
Festool 499104 discs are 5 inch, 100 grit sanding discs with a 9-hole pattern, aligning with medium sanding steps in a typical 80 to 220 grit progression for wood surfaces.
The hook and loop backing on these Rubin 2 discs attaches to matching pads securely yet removes easily, allowing fast disc changes and consistent contact between the disc and the sander pad.
These Festool Rubin 2 discs use aluminum oxide abrasive with a synthetic resin bond and a closed coated structure, providing a strong, continuous cutting surface suited to powered wood sanding.
Rubin 2 is specified to provide 30 percent longer life out of every sheet by shedding wood fibers and reducing clogging, so each disc stays effective across more workpieces.
Festool Rubin 2 5 inch 100 grit hook and loop 9-hole aluminum oxide discs combine a wood-focused grain design with a claimed 30 percent faster removal rate and 30 percent longer life, aligning with production-minded sanding. The ability to move rapidly from 80 to 220 using the same Rubin 2 system supports predictable surface preparation on hardwoods, softwoods, tropical woods, and wood-based sheet goods. For shops and serious woodworkers looking to streamline sanding passes while holding a consistent scratch pattern, this Festool 499104 disc provides a defined 100 grit step within that workflow.
Sold In: 1 Box