
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
LAM300T4 plate jointer cutter is a special face frame plate jointer cutter from Amana Tool that cuts blind right-angle biscuit joints in narrow stock. This smaller diameter blade is designed as a replacement cutter for biscuit jointers that accept a 100mm diameter cutter with a 22mm bore. The blade has a 100mm diameter with 6 teeth, so it delivers the intended cutting profile for plate jointer applications where clean, accurate biscuit slots are needed in woodworking stock. The cutter works with a simple depth adjustment on the biscuit jointer, which keeps setup straightforward when dialing in the joint. This tool fits plate jointer work where face frame construction and similar blind joints are part of the workflow.
The LAM300T4 plate jointer 100mm diameter x 6T, 22mm bore cutter fits biscuit jointers that accept a 22mm bore interface, aligning the blade with the machine arbor for stable running. The web description notes that a simple depth adjustment on the machine allows the use of this blade, so installers set cutting depth on the biscuit jointer to match the smaller diameter while maintaining the desired blind right-angle biscuit joint depth. This adjustment keeps the joint within the stock thickness, which is important when working in stock as narrow as 1-3/4 inches on face frames and similar workpieces.
The Lamello cutter designation for the LAM300T4 points to plate jointer use in woodworking where blind right-angle biscuit joints are required. The blade is specified to cut blind right-angle biscuit joints in stock as narrow as 1-3/4 inches, which suits face frame rails, stiles, and similar narrow strips that need strong corner or T-joints without through-slots. The web description states that this smaller diameter blade fits most biscuit jointers, including Lamello, Virutex, Freud, Kaiser, Elu, De br Walt, and others, so it is used in shops that operate these branded machines. In that setting, the cutter supports plate jointer work across cabinets, frames, and other assemblies relying on biscuit reinforcement at right angles.
The LAM300T4 plate jointer 100mm diameter x 6T, 22mm bore configuration provides a defined cutting circle and tooth pattern that aligns with the biscuit jointer body, promoting consistent slot size for mating biscuits. Because the cutter is a replacement cutter, swapping it in maintains the jointer blade geometry that the machine is designed around, which helps preserve existing setup practices for blind right-angle biscuit joints. The mention that a simple depth adjustment on the machine allows use of this blade means installers can dial in depth to match the smaller diameter, so joints stay blind within the stock even when working at the 1-3/4 inch minimum width. The stated fit to Lamello, Virutex, Freud, Kaiser, Elu, De br Walt, and others means shops with these machines can keep a consistent cutter specification across different biscuit jointers that share the 22mm bore interface.
The LAM300T4 cutter creates blind right-angle biscuit joints, so the slot remains within the material and supports corner or right-angle connections in woodworking assemblies.
The plate jointer cutter is specified for stock as narrow as 1-3/4 inches, allowing biscuit joints in relatively slim rails, stiles, and similar narrow parts.
The LAM300T4 plate jointer cutter is described as 100mm diameter with 6 teeth and a 22mm bore, matching biscuit jointers built for that diameter and arbor size.
The cutter uses a simple depth adjustment on the biscuit jointer, so depth settings are set to match the 100mm diameter while maintaining blind right-angle joints.
The LAM300T4 cutter is stated to fit Lamello, Virutex, Freud, Kaiser, Elu, De br Walt, and others that accept a 22mm bore cutter of this type.
The cutter serves as a replacement plate jointer blade for creating blind right-angle biscuit joints, supporting face frame and similar woodworking assemblies.
The LAM300T4 plate jointer cutter from Amana Tool is identified as a replacement cutter with 100mm diameter, 6 teeth, and a 22mm bore, so it suits biscuit jointers built for that interface. Its ability to cut blind right-angle biscuit joints in stock as narrow as 1-3/4 inches connects directly to face frame and similar work where narrow parts still need reinforced joints. The simple depth adjustment described for machine setup means switching to this cutter keeps workflow straightforward while supporting the specified plate jointer applications.
Sold In: 1 Each