Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage One knob is a 1-1/8 inch diameter cabinet knob designed for decorative hardware applications where consistent sizing matters across doors and drawers. The knob is part of the Advantage Plus collection, tying this piece to a broader Berenson hardware family for projects that call for coordinated styles. Its material is zinc die cast, which provides a solid metal feel while maintaining dimensional accuracy at the 1-1/8 inch diameter and 1-1/8 inch projection. The weathered nickel finish gives the knob its distinct appearance, so designers and installers can match it to other weathered nickel decorative hardware on a job. A base diameter of 5/8 inch defines the contact area against the cabinet surface, which helps set expectations for how much footprint the knob covers on doors or drawer fronts.
The stated 1-1/8 inch diameter, width, and projection define the overall envelope of this knob, so installers can lay out hole locations knowing exactly how far the piece extends in all directions. The 5/8 inch base diameter describes the contact circle where the knob meets the cabinet surface, which helps when planning edge distances and checking that the base clears panel profiles. The knob uses an 8-32 x 1 inch screw size, giving a clear thread and length standard that matches common cabinet knob drilling and mounting workflows. With these defined measurements and the weathered nickel finish, the knob can be specified confidently wherever matching dimensions and finish continuity matter on a project.
This Berenson Traditional Advantage One Series knob is identified as a knob in the Decorative Hardware & Moldings category, positioning it for cabinet and furniture door and drawer fronts. The 1-1/8 inch diameter and width mean the front face presents a balanced circular profile, which suits standard cabinet door sizes without dominating narrow rails. Its 1-1/8 inch projection defines how far the gripping point stands off the surface, so the knob leaves room for fingers while staying tight to the cabinetry, a detail that matters on doors near adjacent walls or appliances. The 5/8 inch base diameter establishes a smaller footprint behind the larger face, giving a stepped look that works well on flat fronts or simple panel designs. With a weathered nickel finish and Advantage Plus collection designation, the knob supports projects where a unified finish and collection-based look are part of the design brief.
The material specification of zinc die cast indicates a metal component formed to controlled dimensions, which supports repeatable installation when multiple knobs from the same part number are used across a kitchen or bank of built-ins. The 1-1/8 inch length or diameter, matching the listed width, makes layout straightforward because the knob is a true round form with symmetrical sizing, simplifying centerline measurements from door and drawer edges. The defined 1-1/8 inch projection informs how far the pull extends into the room, helping installers maintain even clearance lines on face frames or frameless cabinetry. A 5/8 inch base diameter offers a predictable bearing area around the mounting hole, which is useful when aligning the knob on narrow stiles or when working near edge profiles. The 8-32 x 1 inch screw size gives a standard thread used widely in cabinet hardware, streamlining installation when the same tap and drill sizing are used across multiple doors and drawers.
The Berenson 9339-10WN-P knob has a 1-1/8 inch diameter, a 1-1/8 inch width, a 1-1/8 inch projection, and a 5/8 inch base diameter, so installers know its full footprint and stand-off.
The weathered nickel finish sets the knob's visual tone, allowing it to align with other weathered nickel cabinet hardware for a coordinated appearance on doors and drawers.
The knob is zinc die cast, providing a metal body that supports consistent dimensions and a solid feel when used repeatedly across cabinet installations.
The knob uses an 8-32 x 1 inch screw size, giving a clear thread and length standard that fits typical cabinet door and drawer front thicknesses.
The 1-1/8 inch projection sets how far the knob extends from the cabinet face, providing finger clearance while keeping the pull point close to the door surface.
This Berenson Traditional Advantage One knob is suited to cabinet and furniture doors or drawers where a 1-1/8 inch round knob and weathered nickel finish are desired.
The Berenson Traditional Advantage One knob combines a 1-1/8 inch diameter, 1-1/8 inch projection, and 5/8 inch base with a weathered nickel finish, giving installers a clearly defined size and appearance. With zinc die cast construction, a specified 8-32 x 1 inch screw size, and Advantage Plus collection alignment, this knob fits projects that call for repeatable dimensions and coordinated decorative hardware across multiple cabinet doors and drawers.
Sold In: 1 Each
