Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Conquest knob is a 1-3/8 inch diameter cabinet knob designed for use where a round pull point is needed on doors or drawers. The knob is part of the Conquest collection, so it keeps styling consistent across a project that uses this series. The Venetian Bronze finish provides a dark, warm tone on the visible surfaces, helping hardware visually coordinate with similar bronze-toned hinges or fixtures. The knob is made from zinc die cast material, which gives a solid metal feel while supporting repeatable dimensional accuracy from piece to piece. A 1 inch projection sets how far the knob stands off the cabinet face, creating comfortable finger clearance while limiting how far it extends into walk paths. The base diameter of 5/8 inch defines the footprint against the wood, which matters when covering previous imprint marks or finishing transitions.
This Belwith Keeler knob uses a length or diameter of 1-3/8 inch, so installers can size hole locations and spacing knowing the head will cover the drilled bore cleanly. The 1 inch projection defines how far the gripping point sits from the door or drawer face, giving a predictable offset when laying out knob lines relative to frames or appliance clearances. The base diameter of 5/8 inch identifies the circular area that will rest against the cabinet surface, helping layout when working near edge profiles or panel detail. The specified screw size of 8-32 x 1 inch describes the thread and length interface to the cabinet front, which matters for tapping into pre-bored holes or selecting compatible door thickness ranges in typical cabinet construction.
The Conquest Series Venetian Bronze knob is categorized under decorative hardware and moldings for knobs, so it suits cabinetry or similar millwork that calls for visible pulls. With a 1-3/8 inch diameter, this knob works well on standard cabinet doors and drawers where a medium-sized round pull balances scale and grip. The Venetian Bronze finish matches projects that specify Venetian Bronze surfaces, which helps installers maintain a unified appearance across knobs and related hardware in kitchens, baths, or built-ins. Because the knob belongs to the Belwith Keeler Conquest collection, it can be applied alongside other Conquest pieces to keep profiles and finishes aligned across a complete room layout.
The 1 inch projection on this Belwith Keeler Venetian Bronze hardware sets a repeatable pull distance from the cabinet face, allowing installers to run straight visual lines of knobs without varying stand-off depths. The zinc die cast material keeps the knob geometry consistent, which supports jigs and drilling templates when repeating the same center-to-edge dimensions across a run of fronts. A base diameter of 5/8 inch defines the contact circle, so layouts can be planned to land fully on flat sections of rails or stiles for a clean seating surface. The 8-32 x 1 inch screw size gives a known fastener specification, streamlining drilling and threading workflows for cabinets built around standard knob hardware dimensions.
The Belwith Keeler Conquest knob has a 1-3/8 inch diameter head, 1 inch projection, and a 5/8 inch base diameter, so layout and drilling can be based on those specific measurements.
The knob is made from zinc die cast material, which provides a metal body with consistent molded dimensions useful for repetitive cabinet installations.
The P14848-VBZ knob uses a Venetian Bronze finish, giving a dark bronze appearance that coordinates with other Venetian Bronze hardware in the same project.
This Venetian Bronze cabinet knob has a 1 inch projection, setting a fixed stand-off that balances finger clearance with minimal outward extension from the cabinet face.
The Belwith Keeler Conquest knob uses an 8-32 x 1 inch screw size, giving installers a defined thread and length for interfacing with common cabinet door and drawer thicknesses.
The 5/8 inch base diameter sets the contact footprint on the door or drawer front, which helps position the knob on flat areas and cover the drilled hole cleanly.
The Belwith Keeler Conquest Series Venetian Bronze 1-3/8 inch diameter knob with zinc die cast construction ties together defined dimensions, a 1 inch projection, and a specified 8-32 x 1 inch screw size. These documented details support accurate layout, drilling, and repeatable alignment across cabinet doors and drawers when a Venetian Bronze Conquest Series look is required.
Sold In: 1 Each