
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Belwith Keeler Deco knob gives you a 1-1/4 inch diameter pull point in a compact round profile, so doors and drawers get a clear, repeatable grip location. The knob is part of the Deco collection, which keeps styling consistent across multiple cabinet pieces for a coordinated layout. Its 1 inch projection sets the hand off the face just enough for a comfortable pull while limiting how far it extends into walkways. The base diameter at 1 inch keeps pressure spread on the cabinet surface, which supports solid contact on the mounting area. The knob is made from zinc die cast, giving it a dense, molded construction that supports everyday cabinet use. A satin nickel finish provides a muted metal look that pairs with many hinge and slide finishes, helping millwork, built-ins, and furniture read as one planned installation.
The 1-1/4 inch diameter on this Belwith Keeler Deco knob provides a clear drilling target for installers laying out fronts, so center points are simple to mark from door or drawer edges. With a 1 inch projection, the knob creates a known offset that works well with standard overlay cabinet doors, as it keeps hands away from the edge while still tight to the face. The 1 inch base diameter presents a flat bearing surface against the cabinet, which supports stable seating when the fastener is tightened from the back. The specified 8-32 thread for the screw interface aligns with common cabinet drilling and tapping practices, letting installers plan their bore sizes around a familiar fastener size for consistent pull alignment.
This Belwith Keeler Deco series satin nickel 1-1/4 inch diameter knob works well anywhere a compact, centered pull is preferred, such as cabinet doors, drawer fronts, and small access panels. Its 32 mm diameter size balances finger clearance with tight spacing, which is useful on narrow drawer banks or framed doors where knobs sit closer together. The 1 inch projection supports use on both face frame and frameless cabinet constructions because it holds the grip point out from the plane without feeling bulky. The satin nickel finish coordinates with other satin nickel cabinet hardware, letting shop-built pieces, built-in cabinetry, and furniture share the same visual finish for continuity through a room or project line.
The defined 1-1/4 inch diameter gives installers a fixed reference when using jigs or templates, so spacing from door edges and between knobs stays consistent over multiple fronts. With a 1 inch projection, the centerline of the knob sits at a predictable distance from the cabinet face, which helps keep the feel of every door pull nearly identical throughout a kitchen or office run. The 1 inch base diameter sets a clear footprint that can be aligned square to door and drawer edges, aiding in visual straightness when viewed across a bank of cabinets. Zinc die cast construction gives the knob a uniform body that seats firmly against the surface when tightened using the 8-32 screw interface, helping reduce wiggle at the mounting point during normal operation. The Deco collection styling ties these technical details to a single design language, so installers can repeat the same knob choice while maintaining both mechanical and visual consistency.
The Belwith Keeler Deco knob has a 1-1/4 inch (32 mm) diameter, 1 inch projection, and a 1 inch base diameter, which together define clear drilling and layout distances on cabinet fronts.
The 1 inch projection holds the grip point off the cabinet face enough for fingers to pull comfortably while keeping the knob compact in walkways and tight spaces.
The knob is zinc die cast, giving it a solid molded construction that supports repeated opening and closing on everyday cabinet installations.
The P3101-SN knob uses a satin nickel finish, providing a soft metallic look that pairs well with other satin nickel cabinet hardware.
The Belwith Keeler Deco knob is designed for an 8-32 screw, aligning with a common thread standard used in cabinet hardware installations.
The 1 inch base diameter spreads contact on the door or drawer surface, helping the knob seat firmly and maintain alignment when tightened.
The Belwith Keeler Deco series satin nickel 1-1/4 inch diameter knob P3101-SN from Wurth Baer Supply provides defined dimensions that translate directly into predictable cabinet layouts. Its zinc die cast body, 1 inch projection, and 1 inch base diameter support repeatable mounting and a steady pull feel across doors and drawers. The satin nickel finish ties into other satin nickel cabinet hardware, simplifying finish selection for larger projects. For cabinet shops, millwork teams, and detail-focused DIY users, these fixed specifications help plan drilling patterns and visual lines with confidence before committing fronts to final installation.
Sold In: 1 Each