Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
left straight edge wood pedestal foot describes a shaped wood support designed to sit at the base of cabinets, furniture, or built-ins. This Pro Value Series part is a wood pedestal foot that creates a defined transition from floor to casework, giving you a stable, repeatable footprint wherever a left-side straight edge layout is needed on a run of cabinetry or furniture.
The 6 x 1 x 4-1/2 wood pedestal foot uses its 6 inch length, 1 inch width, and 4-1/2 inch height to lift a cabinet or panel assembly to a consistent working height, which helps align multiple units along a wall or built-in. As a bun foot in the Decorative Hardware & Moldings pedestal feet category, it plays the role of both structural support and visible trim at the bottom of traditional furniture projects.
Made of unfinished wood in a cherry species, this SZDW11213CH traditional left straight foot ships ready for your stain or clear finish system, so it can be integrated into a wider finishing workflow while still matching cherry case components on site or in the shop.
This 4-1/2 inch bun foot is sized to act as a pedestal under cabinet corners or furniture ends, and its 6 x 1 footprint provides a clear bearing surface for attaching to case bottoms or sub-bases using your preferred method. The straight left edge gives you a square, predictable reference point against a side panel or wall, which speeds layout when you are repeating the same setup across multiple units.
Because the foot is made of unfinished cherry wood, it can be pre-finished before installation or finished after attachment as part of the assembled cabinet or furniture base. That flexibility lets you match the workflow of your shop, whether you prefer to mount finished components or spray the complete assembly after dry-fitting the bun feet.
As part of the Decorative Hardware & Moldings pedestal feet class, this Pro Value Series left straight edge wood pedestal foot is built for use at the lower corners or returns of cabinets, vanities, and furniture pieces that need a traditional raised stance. The 6 inch length allows the foot to sit under more of the bottom rail or apron, which is useful on wider cabinet stiles or furniture ends where you want the support to read as an intentional design element rather than a small leg.
The 1 inch width makes the pedestal foot a good match for slimmer bases or where floor projection needs to stay compact, such as along toe spaces or near walkways. With its 4-1/2 inch height, the bun foot lifts the case to a point where cleaning under or around the furniture is less awkward, while still keeping the overall profile in a traditional range for residential and light commercial woodworking.
The left straight edge configuration matters when you are building runs that terminate at a wall or when one side of the cabinet base aligns with a panel, because the straight edge gives you a clear line for joining base moldings or scribes. In practice, that edge can act as a visual stop on the left side of a piece, so your layout of end panels, fillers, or returns stays consistent across multiple similar builds.
The 6 x 1 x 4-1/2 dimension set on this bun foot gives you fixed geometry that can be repeated across an entire job, which is useful when you are standardizing cut lists or CNC programs for bases that rely on pedestal feet. When every pedestal foot in a run shares the same height, establishing a common reference for door reveals, drawer fronts, and end panels becomes straightforward, and that consistency helps avoid extra fitting work during install.
Cherry unfinished wood construction means the foot is ready to accept the same stains, dyes, or clear coats used elsewhere on a cherry cabinet or furniture project. That material match allows the pedestal foot to read as part of the primary case rather than an unrelated component, which is especially important on projects where grain and color continuity from top to bottom are part of the design intent.
The SZDW11213CH part number identifies this specific traditional left straight foot within the Pro Value Series line, so once a shop standardizes on this size and style, reordering for future jobs keeps geometry identical without reworking plans. With the part cataloged under bun feet in the pedestal feet category, it slots naturally into existing workflows that specify decorative hardware and moldings as discrete line items on project takeoffs.
The left straight edge wood pedestal foot measures 6 inches long, 1 inch wide, and 4-1/2 inches high, so it sets a consistent base height and footprint for cabinets or furniture pieces using this part.
The Pro Value Series pedestal foot is made of unfinished cherry wood, allowing it to be stained or clear coated to align with other cherry components in a project.
The left straight edge gives a clean, square reference along the left side of a cabinet or furniture base, supporting precise alignment against walls, end panels, or adjoining moldings.
This bun foot is used at the base of cabinets, vanities, and furniture as a pedestal, carrying the load at corners or ends while presenting a traditional raised appearance.
The 4-1/2 inch height elevates the case to a defined level, helping establish consistent toe space or furniture stance across multiple units that use the same pedestal foot.
Part number SZDW11213CH identifies this specific traditional left straight edge cherry pedestal foot, simplifying reorders and standardization across repeat projects.
This cherry wood pedestal foot from the Pro Value Series combines a 6 x 1 footprint with a 4-1/2 inch height and a left straight edge layout, giving you a repeatable way to support and finish cabinet or furniture bases. When a project calls for unfinished cherry in a traditional bun foot form, using this SZDW11213CH part lets your shop or jobsite rely on known dimensions and a consistent appearance from one build to the next.
Sold In: 1 Each