
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 24 inch drawer slides in the 1805 Series give you a side mount epoxy coated euro slide built for cabinet jobs that need a 3/4 extension self-close action. The 24 inch length matches deeper cabinet drawers, so the slide supports common base cabinet depths without overtravel. The self-closing design pulls the drawer in during the last part of travel, which keeps fronts seated against the cabinet and helps drawers stay shut in everyday use. A positive double-out stop limits travel in both directions, which keeps the drawer from being pulled completely free during normal operation. The unhanded side mount layout means both cabinet and drawer members work on either side, simplifying layout when installing multiple drawers in a run. The almond finish matches almond-toned cabinet interiors, so the hardware blends with light-colored casework instead of standing out.
This KV Model #1805 Series side mount drawer slide uses a side clearance of 1/2 inch plus, 1/32 inch minus on each side, which defines the finished drawer width relative to the cabinet opening for a proper running fit. The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, which seat cleanly in the slide holes and provide a low profile head that sits within the formed track. The 32 mm pattern integrates with row-drilled cabinet sides, which helps align the cabinet members with standard system holes without extra layout. A lift out disconnect on the slide allows the drawer member to be separated from the cabinet member, which supports drawer removal for finishing or adjustment and later reengagement on the same hardware position.
The Knape and Vogt 1805T ALM 600 slide is a side mount drawer slide in the epoxy coated euro category, which suits frameless or face-frame cabinets using side-mounted runners. The 24 inch length pairs with deeper kitchen, bath, or utility drawers that extend close to the full cabinet depth. The 3/4 extension travel keeps a portion of the drawer supported inside the cabinet, which is useful on taller or heavier drawers where full extension is not required. The unhanded design of the cabinet and drawer members allows the same part style to work on either left or right side, which can streamline planning when repeating the 24 inch drawer size in multiple openings. The 35.5 mm overall height fits within typical drawer side heights used with euro slides, which gives clearance above the slide for drawer bottom grooves and fastener placement.
The 32 mm hole pattern on the slide body aligns with 32 mm system drilling in cabinet sides, which supports consistent vertical spacing between drawers and helps keep fronts aligned across a stack. The almond epoxy coated finish is part of Knape and Vogts epoxy coated euro slide line, which coordinates with other almond components in the same cabinet run. The SAP description of 24 foot DRWR SLDE, CAB AL 3/4 EXT reflects the 24 inch cabinet application and 3/4 extension action, which helps match this slide to design notes or cut lists referencing that description.
The self-closing design on this 1805 Series slide provides a defined pull-in toward the case at the end of travel, which helps keep drawer reveals consistent along the face of the cabinet when fronts are aligned to the closed position. The positive double-out stop gives both forward and rear stopping points inside the slide, which keeps the drawer captured within its intended stroke and helps maintain the contact surfaces that control alignment. The lift out disconnect allows the drawer member to disengage from the cabinet member, which aids in sanding, finishing, or adjusting drawer fronts without working inside the cabinet cavity.
The side clearance specification of 1/2 inch plus, 1/32 inch minus on each side gives a numeric target for drawer sizing, which supports repeatable fits across multiple drawer boxes cut from the same program or jig. The recommended #6 x 5/8 inch Phillips pan head fasteners match the slide thickness and hole size, which helps prevent interference with the moving members while still giving holding power into typical cabinet materials. The almond epoxy coated finish supplies a uniform coated surface over the slide, which supports smooth sliding contact over time and matches almond-colored interiors for a consistent appearance across the job.
The KV 1805T ALM 600 is a Knape and Vogt 24 inch 3/4 extension self-close epoxy coated euro side mount drawer slide, which suits cabinet drawers built for side-mounted runners.
The 1805 Series slide uses 1/2 inch plus or minus 1/32 inch side clearance on each side, which sets the drawer width needed for free travel in a given cabinet opening.
The 1805 Series almond slide is specified for #6 x 5/8 inch Phillips pan head screws, which seat in the slide holes and keep head height low within the moving track.
The KV 1805 Series slides provide 3/4 extension on a 24 inch length, which brings most of the drawer out of the cabinet while leaving a section supported inside the case.
The 1805 Series slide has a height of 35.5 mm and uses a 32 mm pattern, which aligns with 32 mm system line-bored cabinet sides for repeatable mounting positions.
The KV 1805T ALM 600 slide has an almond epoxy coated finish, which matches almond-toned cabinet interiors and provides a coated surface for smooth drawer movement.
The Knape and Vogt 24 inch drawer slides in the 1805T ALM 600 configuration bring 3/4 extension, self-closing action, and a 32 mm compatible pattern to side mount euro cabinet projects. The specified 1/2 inch plus, 1/32 inch minus side clearance and 35.5 mm height support predictable drawer box sizing and layout. The almond epoxy coated finish and unhanded members fit banks of drawers using almond interiors and side-mounted runners. Use this KV 1805 Series slide when your cabinet plan calls for a 24 inch, 3/4 extension, self-close euro slide in almond.
Sold In: 1 Set