Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value Series PRO 2.0 14 inch drawer slides are full-extension, side-mount ball-bearing slides in a Black finish, designed for cabinet shops and builders who need a dependable, volume-ready slide that stays visually clean inside dark-finished or black-interior cabinets.
Most side-mount slides ship in zinc or Anochrome, and on a white or natural maple interior that is fine. On a dark interior — black-painted face-frame cabinets, charcoal or graphite melamine boxes, or any cabinet where the drawer box sides are visible when the drawer is open — a silver slide creates a finish mismatch that reads as unfinished work. The PRO 2.0 in Black eliminates that. It is the practical choice for media consoles, black-interior entertainment centers, dark shop cabinets, and any installation where the hardware is meant to recede rather than call attention to itself. Standard motion means no soft-close damping and no self-close ramp: the drawer stays where it is left, which suits shop and utility drawers where mechanism-free simplicity is an asset.
The slides are steel, finished in Black, and run on ball bearings in a telescopic three-member arrangement. The Black coating covers the steel members so the hardware presents a consistent, dark surface rather than the bright zinc typical of production-grade slides. At 14 inches, this length suits shallower drawers — desk drawers, small base-cabinet drawers, and utility boxes in the 12 to 14 inch depth range — where a longer slide would overhang the cabinet back or crowd rear hardware.
Cabinet shops running dark-finish lines reach for the PRO 2.0 Black when they need a volume-priced slide that does not require a separate painting step or a strip of black tape to mask silver hardware. Designers specifying black-on-black interiors get a slide that works with the finish plan instead of against it. Contractors retrofitting dark shop cabinets or utility storage avoid a finish mismatch without stepping up to a specialty or premium slide. For any buyer working through a high-volume run where finish consistency matters and budget is fixed, the PRO 2.0 Black delivers a complete, ready-to-install slide at a production price point.
The slide is steel with a Black coating applied over the members. The underlying construction is the same steel ball-bearing build as the rest of the PRO 2.0 line.
No. The PRO 2.0 is a standard-motion slide with no closing mechanism. The drawer stays wherever you leave it. If you need soft-close or self-close, that is a different slide.
Side-mount ball-bearing slides need 1/2 inch of clearance per side. Build the drawer box 1 inch narrower than the cabinet opening — one-half inch for each slide.
Match slide length to drawer depth. A 14 inch slide suits drawers in the 12 to 14 inch depth range and cabinets with enough interior depth to clear the back of the slide. For deeper drawers, step up to the next length in the PRO 2.0 line.
No. The PRO 2.0 is non-handed, so each slide fits either side of the drawer. Order the quantity of pairs you need without sorting by hand.
When the cabinet interior is dark and finish consistency matters, the PRO 2.0 Black delivers full-extension, 100 lb ball-bearing performance in a color that works with the design instead of interrupting it.
Sold In: 60 Each