Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 16 inch drawer slides are full extension, side mount ball bearing slides designed for drawer applications needing full access and consistent movement. The 16 inch length sets the slide up for drawers built around that nominal depth, which matters when laying out cabinet carcasses and maximizing storage. A weight rating of 100 lb supports drawers built for typical residential or light commercial loads, helping keep movement controlled under everyday use. The unhanded design simplifies planning because the same member works on either side, reducing part sorting and speeding repetitive installations. These slides are part of the PRO 2.0 Series, so the details stay consistent across matching lengths, which helps when standardizing a cabinet line. The manufacturer part number 0112.012.00416B-BK identifies this specific 16 inch black drawer member for ordering and job documentation.
The side mount design locates these slides on the cabinet sidewalls, which suits standard face frame and frameless layouts built for side mounting. A side clearance of 1/2 inch plus 1/32 inch and minus 0 is specified, giving a clear target gap between the drawer and cabinet members for planning drawer box width. The 32mm pattern callout means the slide holes align to the common 32mm cabinet system, which supports drilling on line boring equipment. Recommended fasteners are #8 x 7/16 inch Phillips pan head, tying the slide firmly to typical cabinet side materials at the specified points. Fixed rear brackets are available, which provides a way to secure the back of the slide where full-depth side material is not present. The lever disconnect feature allows separating the drawer member from the cabinet member, which supports installing or removing the drawer box without disturbing the cabinet member alignment.
These 16 inch full extension standard ball bearing drawer slides serve side mount drawer applications where full travel is needed. The 16 inch length suits mid-depth drawers used in base cabinets, utility cabinets, and similar storage layouts that are designed around this extension. With a side clearance of 1/2 inch plus 1/32 inch and minus 0, these slides give a defined target for drawer box sizing relative to the opening, which supports consistent fit across multiple units on a job. The cold rolled steel construction and continuous bearings work together to guide the drawer along its full travel, supporting steady motion under the stated 100 lb rating. The black finish on the drawer member presents a dark profile along the drawer side, which can visually match other dark hardware and interior treatments in the cabinet run.
The 32mm pattern is specified on these slides, so the hole positions are laid out to align with 32mm system boring, supporting repeatable mounting on line-bored cabinet sides. This pattern-driven mounting reduces layout steps, because the slide references the existing system holes instead of relying on individual measurements for each cabinet. The unhanded design means either slide member can serve on the left or right side, which simplifies inventory and installation because there is no need to separate handed parts as work progresses. The lever disconnect allows the drawer member to be released from the cabinet member, which supports mounting the cabinet member into the case first, then attaching the drawer member to the box, and reconnecting after alignment. Fixed rear brackets being available gives another way to support the rear of the slide in situations where the cabinet construction does not provide a continuous side, which helps maintain alignment at the back of the run. The combination of cold rolled steel material and continuous bearings supports consistent raceway geometry, which helps the slide track smoothly along its design path over the rated travel.
This Pro Value Series model is a 16 inch full extension standard ball bearing side mount drawer slide from the PRO 2.0 Series, so it is suited to side-mounted drawer applications needing full travel.
These 16 inch drawer slides have a 100 lb weight rating, so they are intended for drawers carrying loads within that rating under normal operation.
These slides specify a side clearance of 1/2 inch plus 1/32 inch and minus 0, so drawer box width can be planned to maintain that clearance in the opening.
These 16 inch slides are noted as having a 32mm pattern, so their mounting holes are laid out to align with 32mm system line boring in cabinet construction.
These slides are made from cold rolled steel with a black finish, providing a steel raceway with a dark appearance along the drawer sides.
These drawer slides list #8 x 7/16 inch Phillips pan head fasteners as recommended, matching the slide holes for securing to typical cabinet side materials.
Pro Value Series 16 inch drawer slides combine full extension, a 100 lb weight rating, and side mount ball bearing construction, which suits many standard cabinet drawer applications. The defined 1/2 inch plus 1/32 inch and minus 0 side clearance, 32mm pattern, and unhanded design support efficient layout and repeatable installation on production or retrofit work. With cold rolled steel construction, continuous bearings, and a black finish, these PRO 2.0 Series slides fit projects that call for predictable movement and a darker hardware profile. For jobs built around 16 inch full extension drawers, this specific 0112.012.00416B-BK drawer member gives a clear part reference when planning, ordering, and scheduling install work.
Sold In: 60 Each