Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 16 inch full extension drawer slides use a standard ball bearing design to let drawers travel their full length, so the entire 16 inch depth stays accessible during daily use. The side mount configuration positions the slides along the cabinet sides, which suits common kitchen, bath, and shop drawer construction where side mounting sets the alignment. These slides are unhanded, meaning the same member works on either side, which simplifies layout and reduces part sorting during production runs or repairs. The black finish on the cold rolled steel construction creates a darker hardware line at the drawer side, which can visually blend with darker interiors or exposed hardware details. A lever disconnect is built into the design, so drawer members can separate from cabinet members for fitting, finishing, or later service without disturbing the cabinet installation. Continuous bearings in the slide raceways support smooth and quiet movement during opening and closing, which matters in residential and commercial environments where noise control and consistent feel are important.
These Pro Value Series side mount drawer slides are specified as standard ball bearing slides, so they fit projects planned around side-mounted runners rather than undermount hardware. The side clearance requirement of 1/2 inch plus 1/32 inch -0 gives a defined gap to build into drawer width calculations, which helps installers cut drawer boxes that slide without binding while staying laterally stable. The 32mm pattern reference aligns with cabinets drilled on that system, allowing slide screws to follow existing rows so each pair locates consistently front to back. The recommended fasteners are #8 x 7/16 inch Phillips pan head screws, which match the slide hole sizing and let installers drive a common screw style across all mounting points. The lever disconnect function lets the drawer member release from the cabinet member during installation, so fit adjustments can happen with the drawer removed while the cabinet members stay fixed to the case.
These 16 inch full extension side mount slides sit within the Side Mount Drawer Slides product class, which targets drawers built with side-mounted runners rather than bottom or center guides. The 16 inch length suits cabinet interiors where drawer depth falls around that dimension, such as many face frame or frameless base cabinets and utility storage cases. A weight rating of 100 lb fits drawers expected to hold medium loads, such as tools, pantry goods, office items, or shop supplies that stay below that rating during service. The 1/2 inch plus 1/32 inch -0 side clearance specification ties directly into standard cabinet layouts, where carcass openings and drawer boxes are sized to produce that clearance gap at each side. A 32mm pattern reference means these slides align well with casework drilled on that metric spacing, such as production cabinets using system holes for mounting hardware at consistent heights and depths. Industry ratings that list BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 place these slides in contexts where tested performance categories are valued, such as commercial, institutional, or higher-use residential work.
The continuous bearings in these slides create a smooth and quiet travel path along the members, which supports drawers that feel consistent throughout their stroke even as they approach the full extension position. The lever disconnect feature allows the installer to separate drawer and cabinet members after initial mounting, which helps with finishing, hardware adjustments, or later drawer box replacement while leaving the cabinet members in place. Unhanded construction means the same slide configuration mounts on either the left or right side, which reduces stocking complexity and speeds assembly when multiple drawers share the same slide type. The specified side clearance of 1/2 inch plus 1/32 inch -0 influences how accurately drawer widths are cut, which in turn affects racking resistance and ease of slide engagement along the cabinet members. The recommended #8 x 7/16 inch Phillips pan head screws match the slide hole size and head profile, which supports firm contact between the slide flanges and cabinet or drawer material. The black cold rolled steel members combine structural rigidity with a darker finish, which can visually recede against darker interiors while still supporting the rated 100 lb load in standard drawer constructions.
These Pro Value Series 16 inch full extension drawer slides match drawer boxes built around a 16 inch depth, so the drawer can open to expose its full interior length.
These side mount drawer slides use a side clearance of 1/2 inch plus 1/32 inch -0 per side, guiding how wide the drawer box should be cut relative to the cabinet opening.
These 16 inch full extension ball bearing slides have a weight rating of 100 lb, which sets the intended maximum working load for the drawer contents in normal use.
The lever disconnect on these slides lets the drawer member separate from the cabinet member, which simplifies mounting, finishing, and later drawer removal without disturbing cabinet members.
These slides follow a 32mm pattern, so their mounting holes line up with cabinets drilled on that system, helping position slides consistently across multiple drawers.
These Pro Value Series slides are made from cold rolled steel with a black finish, providing a rigid slide structure with a dark appearance along the drawer sides.
These Pro Value Series 16 inch full extension drawer slides combine a 100 lb weight rating, side mount layout, and standard ball bearing design to support everyday cabinet drawers built around a 16 inch depth. The 1/2 inch plus 1/32 inch -0 side clearance and 32mm pattern give fabricators predictable dimensions and mounting locations that align with established cabinet construction methods. Cold rolled steel members with a black finish and continuous bearings support smooth, quiet travel in residential, commercial, or shop environments. For projects calling for BHMA, KCMA, BIFMA, ANSI, or SEFA 8.99 rated hardware in this size and configuration, these unhanded slides provide a consistent option across multiple drawers.
Sold In: 60 Each